Close
Cisco SMARTnet Authorized Reseller

HPE JG242A FlexFabric 5800-48G-PoE+ Ethernet Switch (48×1 GbE PoE+ + 4×10 GbE SFP+)

JG242A

New

High-density 48-port Gigabit PoE+ switch with 10 GbE uplinks.

×
   
 


Detailed Specifications

HPE JG242A

FlexFabric 5800-48G-PoE+ Ethernet Switch (48×1 GbE PoE+ + 4×10 GbE SFP+)

The HPE FlexFabric 5800-48G-PoE+ (JG242A) is a robust Layer 3, rack-mount Ethernet Switch  tailored for enterprise and campus network deployments. It features 48 auto-sensing Gigabit PoE+ ports capable of delivering up to 30 W per port—ideal for powering IP phones, wireless access points, cameras, and other powered devices directly through network cabling . Four dedicated 10 GbE SFP+ uplink slots provide high-speed connectivity to distribution and core layers, ensuring seamless data aggregation and backbone integration Its advanced Layer 3 capabilities, IRF virtualization, dual-stack IPv4/IPv6 support, and rich management options make it a versatile optic for modern networking.

Features

Built into a compact 1U chassis, the HPE 5800-48G-PoE+ delivers enterprise-grade switching with a high performance of 284 Gbps switching capacity and 211 Mpps forwarding rate—ensuring wire-speed performance across all ports . IRF (Intelligent Resilient Framework) technology enables link-level virtualization and survivable network topologies, while RRPP supports rapid ring-based resiliency to ensure minimal failover times . Management flexibility includes CLI, web, SNMP, and support via HPE IMC. Advanced Layer 2 and 3 protocols—including OSPF, BGP, RIP, VRRP, multicast, ACLs, QoS, sFlow, and more—provide robust governance over network traffic and access controls With dual-stack IPv4 and IPv6 support, redundant power supply capabilities, and deep PoE+ support, this switch is highly suited for demanding edge, converged campus, and enterprise deployments.

Advanced Options

The HPE JG242A switch is engineered for resilience and high availability in mission-critical environments. Its support for IRF clustering simplifies management and enhances redundancy by virtually merging multiple switches into a single logical device. RRPP ensures sub-50 ms convergence in ring topologies, preserving network uptime in the face of failures Delivering both high-density PoE+ delivery and advanced Layer 3 switching, the JG242A ensures smooth, scalable operations for converged voice, video, and data applications.

Product Key Features

  • 48× auto-sensing 10/100/1000 Mb PoE+ ports (30 W max each)

  • 4× dedicated 10 GbE SFP+ uplink slots

  • 284 Gbps switching capacity, 211 Mpps forwarding rate

  • Layer 3 routing with rich protocol support (e.g. OSPF, BGP, VRRP, multicast)

  • IRF virtualization, RRPP resiliency, dual-stack IPv4/IPv6

  • Comprehensive management: CLI, Web GUI, SNMP, IMC


Reliability & Performance

With its 1U form factor, redundant power supply support, and efficient thermal design, it integrates seamlessly into densely-racked infrastructure. Network traffic management and performance are hardened by features such as robust QoS, ACL-based traffic control, jumbo frames, sFlow analytics, and IPv6 readiness 

Key Features :

  • 48× 1 GbE PoE+ ports with up to 30 W per port

  • 4× 10 GbE SFP+ uplink modules

  • 284 Gbps capacity; 211 Mpps forwarding

  • Full Layer 3 routing: OSPF, BGP, VRRP, multicast, ACLs, QoS

  • IRF virtualization and RRPP support

  • Rich management: CLI, Web, SNMP, HPE IMC

SpecificationDetails
Model Number JG242A (HPE FlexFabric 5800-48G-PoE+)
Type Layer 3 Managed Ethernet Switch with PoE+
Form Factor 1U rack-mountable
Ports 48× 1 GbE RJ-45 PoE+ (IEEE 802.3at, 30 W)
Uplinks 4× 10 GbE SFP+
Switching Capacity 284 Gbps
Forwarding Rate 211 Mpps
Memory 1 GB DDR2 SDRAM; 512 MB Flash
Virtualization Support IRF with dual-stack IPv4/IPv6
Resiliency Protocols RRPP, IRF, VRRP
Management CLI, Web GUI, SNMP v1/v2/v3, IMC; authentication via RADIUS, TACACS+
Supported Protocols OSPF, BGP, RIP, IGMP, Multicast, ACLs, QoS, sFlow, VLAN, LAG, Jumbo Frames
Power Supply Single, optional redundant PSU
Warranty 90 Days (refurbished) / varies (new)
  • All packages are shipped same day if the order is placed before 3PM CST

    We use UPS/FedEx to ship the packages with different service levels offered by UPS/FedEx

    Overnight Shipping take 1 business day
    Expedited Shipping take about 2-3 business days
    Ground shipping take about 3-5 business days

    You can select the desired service level at Checkout and we will make sure the package is shipped as per the selected service level.

  • We Accept

    i) PayPal
    ii) All Credit & Debit Cards
    iii) Purchase Orders
    iv) Check
    v) Bank Transfer/ACH/Wire Transfer

    To process the order through Paypal/CC, you can simply checkout and process the payment.

    If you want to issue us Purchase Order/Check/Bank Transfer, Please contact us at the following details

    Call: 469.458.9636
    Email: sales@dcsupplies.net

  • If you have any queries, please contact us at the following details and we will be happy to help

    Call
    469.458.9636
    469.458.9638

    Email
    sales@dcsupplies.net

Close