Eaton 5PX2000RTNG2 – Rack/Tower UPS 1950 VA 1950 W

Overview

The Eaton 5PX2000RTNG2 is a line‑interactive uninterruptible power supply (UPS) designed to provide conditioned 120 V AC power and short‑duration battery backup for critical IT loads. It is specified for deployment in network closets, intermediate distribution frames (IDFs), branch office racks, and edge infrastructure cabinets where maintaining continuity of service through utility outages, brownouts, and transient voltage events is required. All specifications below are verified from Eaton’s official product documentation and cross‑checked authorized sources.

This UPS delivers 1950 VA / 1950 W output through a combination of (1) NEMA L5‑20R and (6) NEMA 5‑20R receptacles, integrating into existing 120 V AC ecosystems common in North American IT environments. The line‑interactive topology conditions incoming mains power through automatic voltage regulation (AVR) and transitions to battery when thresholds are exceeded, maintaining a true sine‑wave output to protect sensitive electronics.

Mechanically, the unit ships in a 2U rack/tower convertible chassis with included rack rails and pedestal feet, enabling installation in standard 19‑inch rack frames or standalone placement. It uses a NEMA 5‑20P input on a 10 ft power cord to connect to branch circuits and matches typical rack power distribution form factors without requiring special transformers.

For local and remote management, the 5PX2000RTNG2 has an LCD graphical display for status and diagnostics and includes a pre‑installed Gigabit Network Management Card (NETWORK‑M2) in its expansion slot. This provides remote monitoring, event alerting, and integration with centralized power management platforms such as Eaton Brightlayer Data Centers suite. ABM (Advanced Battery Management) technology helps extend battery life and signals replacement needs.

Practical deployment example: In a medium‑sized IDF rack providing power to a cluster of access switches, firewalls, and virtualized servers, the 5PX2000RTNG2 can condition utility power and sustain operation long enough for generator transfer or completion of orderly shutdown processes. Not appropriate for use in 208/230 V mains environments without step‑down transformers, racks requiring runtime beyond feasible internal plus external battery configurations, or load demands exceeding approximately 1950 W.

Key Features

• Line‑interactive UPS providing 1950 VA / 1950 W output capacity
• Mixed outlets: (1) NEMA L5‑20R, (6) NEMA 5‑20R receptacles
• Rack/tower convertible 2U form factor with rails and feet
• LCD display + pre‑installed Gigabit Network Card (NETWORK‑M2)
• ABM battery tech; supports up to 4 external EBMs (5PXEBM72RTG2)

Specifications