APC AR8100 M6 Hardware Kit for Rack Enclosures

Overview

The APC AR8100 is a rack hardware mounting kit containing M6‑series cage nuts, screws, and washers intended for securing equipment to square‑hole mounting rails in standard rack cabinets. IT engineers, data center technicians, and rack installers use this kit to fully populate vertical rails in 19‑inch enclosures and ensure compliant mounting of servers, PDUs, shelves, and accessories.

This kit includes 32 sets of M6 cage nuts, 32 nylon washers, and 32 slot/Phillips screws to support consistent fastening across rack elevations, particularly in 600 mm‑wide enclosure rails with square hole patterns. These components are essential for maintaining proper EIA‑310‑D rail engagement and preventing equipment loosening under vibration or load.

Mechanically compact, the AR8100 hardware components facilitate installation without dedicated tools beyond standard nut‑drivers or screwdrivers, reducing setup time and minimizing loose parts inventories. The inclusion of both slotted and Phillips head screws supports flexible tool use on site.

This kit is not a stand‑alone rack frame or structural component; it supplies only the necessary fasteners for equipment attachment. It does not provide cable management or load‑bearing features and should be paired with appropriate rack rails and accessories. 

Key Features

• 32× M6 cage nut sets for square‑hole rack rails
• Includes matching nylon washers and screws
• Supports slotted and Phillips screwdriver heads
• Compliant with EIA‑310‑D rack mounting standards
• Designed for 600 mm‑wide enclosure rails

Specifications