Close
Cisco SMARTnet Authorized Reseller

HP JG336 (5900AF‑48XGT‑4QSFP⁺) 48‑Port 1/10 GbE PoE Ethernet Switch

New

Low-latency top-of-rack

×
   
 


  • New

Detailed Specifications

HP JG336 

(5900AF‑48XGT‑4QSFP⁺) 48‑Port 1/10 GbE PoE Ethernet Switch

The HP JG336 (5900AF‑48XGT‑4QSFP⁺) is a high-performance top-of-rack Ethernet Switch optimized for data center access or aggregation deployments. It offers forty-eight auto-negotiating 1/10 GbE RJ‑45 ports and four 40 Gb QSFP⁺ uplinks in a 1U footprint. With ultra-low latency (≤ 1.5 µs for 10 Gb packets) and non-blocking architecture, this Ethernet Switch is ideal for virtualized environments, server clustering, and high-throughput applications. Based on HP FlexFabric architecture with Comware v7 OS, it supports advanced Layer 2/3 routing, IRF stacking, and rich QoS features—delivering deterministic performance for enterprise workloads and seamless scalability using IRF stacking across multiple units.

Features

Part of the HP FlexFabric 5900AF series, the JG336 delivers ultra-low-latency Ethernet Switch (< 1.5 µs for 10 GbE) and deterministic forwarding across all ports, supporting up to 1280 Gb/s switching capacity and forwarding up to ~952 Mpps (64-byte packets) The 48 auto-MDI/MDIX RJ‑45 ports support 1/10 GbE connectivity over existing Cat6a/Cat7 cables, while four QSFP⁺ uplinks provide 40 Gb trunking or breakout into 4×10 Gb links.Running on Comware v7 software, the Ethernet Switch supports rich routing and access feature sets including VLAN, DHCP Snooping, VRRP, OSPF, BGP, RIP, ACLs, multicast IGMPv2/v3, LLDP, and advanced QoS mechanisms like WRED, ECN, SP/WDRR queueing . It integrates with HP Intelligent Resilient Fabric (IRF) for virtual chassis stacking of up to nine units—reducing management overhead and improving scalability

Advanced Options

For availability and compliance, the Ethernet Switch includes hot-swappable redundant power supplies and fan trays with reversible airflow for both front-to-back or back-to-front deployment in data centers. Management is supported via CLI, SNMP v1/v2c/v3, Web GUI, Telnet, and integration with HP Intelligent Management Center (IMC) Built for demanding environments, the JG336 delivers consistent, predictable performance under full line-rate load, thanks to cut-through/non-blocking Ethernet Switch architecture and hardware QoS enforcement Its sub-1.5 µs latency and high packet-per-second capacity suit east-west traffic, virtualization, and storage fabrics.

Product Key Features

    • 48 × 1/10 GbE RJ‑45 ports

    • 4 × QSFP⁺ 40 Gb uplink ports (breakout-capable)

    • Ultra-low latency Ethernet Switch : ~1.5 µs @ 10 GbE

    • High throughput: 1280 Gb/s Ethernet Switch , 952 Mpps forwarding

    • Comware v7 OS with full L2/L3 and QoS support

    • IRF stacking up to 9 units

    • Hot-swap power & fan modules; reversible airflow design


Reliability & Performance

IRF stacking enables up to nine Ethernet Switch to operate as a single logical unit—simplifying management and traffic resilience across interconnected ToR racks. Features such as ISSU (in-service software upgrade) and redundant PSU/FAN options further enhance uptime. The Comware OS supports Layer 3 routing protocols (OSPF, BGP, RIP, VRRP) and security features including SSHv2, ACLs, and port isolation. With support for jumbo frames, VLAN segmentation, LACP link aggregation, and comprehensive diagnostic telemetry via SNMP/IMC, the Ethernet Switch is engineered for modern data center and campus environments requiring robust operations, future scalability, and low operational complexity

Key Features :

    • 48 × 1/10 Gb RJ‑45 ports

    • 4 × 40 Gb QSFP⁺ uplinks with breakout support

    • Layer 2/3 policies, routing, ACLs, multicast support

    • Up to 952 Mpps forwarding rate; 1.5 µs latency

    • IRF stacking up to 9 units

    • Redundant PSUs and reversible airflow fans

SpecificationDetails
Model Number JG336 (5900AF‑48XGT‑4QSFP⁺)
Product Type Managed 48‑port 1/10 GbE Ethernet Switch with 40 GbE uplinks
Ports 48 × 1/10 GbE RJ‑45; 4 × QSFP⁺ 40 GbE ports
Switching Capacity 1280 Gb/s
Forwarding Rate ~952 Mpps @64-byte frames
Latency ~1.5 µs @ 10 GbE (cut-through mode)
MAC Table Size ~16,000–128,000 entries (model-dependent)
IRF Stacking Up to 9 Ethernet Switch 
Routing Protocols OSPF, BGP, RIP, static, VRRP
QoS & Security ACLs, DHCP Snooping, WRED, ECN, LACP, LLDP
Management Interfaces CLI, Web GUI, SNMPv1/2c/3, Telnet, HP IMC
Power & Cooling Dual PSU slots, reversible-airflow fan trays
Form Factor 1U rack-mountable
Compatible OS HP Comware v7 with FlexFabric feature set
  • All packages are shipped same day if the order is placed before 3PM CST

    We use UPS/FedEx to ship the packages with different service levels offered by UPS/FedEx

    Overnight Shipping take 1 business day
    Expedited Shipping take about 2-3 business days
    Ground shipping take about 3-5 business days

    You can select the desired service level at Checkout and we will make sure the package is shipped as per the selected service level.

  • We Accept

    i) PayPal
    ii) All Credit & Debit Cards
    iii) Purchase Orders
    iv) Check
    v) Bank Transfer/ACH/Wire Transfer

    To process the order through Paypal/CC, you can simply checkout and process the payment.

    If you want to issue us Purchase Order/Check/Bank Transfer, Please contact us at the following details

    Call: 469.458.9636
    Email: sales@dcsupplies.net

  • If you have any queries, please contact us at the following details and we will be happy to help

    Call
    469.458.9636
    469.458.9638

    Email
    sales@dcsupplies.net

Close