Close
Cisco SMARTnet Authorized Reseller

HP JL687A Aruba CX 8400X‑32Y Expansion Module — 32× 1/10/25 Gb SFP28 Ports

JL687A

New

High-density 32‑port 25 GbE SFP28...

×
   
 


Detailed Specifications

HP JL687A 

Aruba CX 8400X‑32Y Expansion Module — 32× 1/10/25 Gb SFP28 Ports

The HP Aruba JL687A (8400X‑32Y) is a high-performance line module for the Aruba CX 8400 switch chassis, offering32 SFP28-based ports that operate at 1 Gb, 10 Gb, or 25 Gb speeds. Designed for data center spine or campus core deployment, this Expansion Module enables scalable, low-latency connectivity with flexible optics configurations. Fully compatible with the modular 8‑slot Aruba CX 8400 chassis, it delivers carrier-class availability with redundant fabric, management modules, and AOS‑CX software orchestration—ideal for mission-critical enterprise and campus environments that demand high throughput and programmability via REST APIs and Python-based automation.

Features

The JL687A module slots into an Aruba CX 8400 8‑slot chassis, offering up to 32 SFP28 ports capable of operating at 1 G, 10 G, or 25 G speeds depending on the optics installed, leveraging 25GBase‑X technology for highest-speed links. Ports are arranged into eight interface groups of four each—speed per group must match to avoid configuration conflicts. Default interface speed is 25 G; groups can be reconfigured to 10 G (and 1 G only supported in 10 G mode) via CLI commands.Operating within Aruba OS‑CX, the module benefits from a resilient architecture with full non‑blocking switch fabric (19.2 Tbps across slots, 1.2 Tbps per slot) and advanced high availability via VSX, redundant fabric modules, and hot-swappable components. It supports rich Layer 2/3 protocols including OSPF, BGP, VRF, ECMP routing, QoS enforcement, VPN segmentation via Dynamic Segmentation, and virtualization-aware forwarding. The onboard Network Analytics Engine (NAE) enables predictive monitoring and automated telemetry

Advanced Options

This module delivers enterprise-grade reliability leveraging hot-pluggable design, health LEDs per module and port, and thermal/power management. It integrates tightly with Aruba Fabric Composer and NetEdit for automated configuration and change assurance workflows. Forms a key component in Aruba modern campus and data center networks seeking scale, flexibility, and automation.

Product Key Features

    • 32 × SFP28 ports supporting 1 G / 10 G / 25 G speeds

    • Interface groups of four ports for unified speed configuration

    • Works in Aruba CX 8400 8‑slot chassis

    • Fully redundant fabric and management modules supported

    • Non‑blocking 1.2 Tbps per slot, 19.2 Tbps total fabric

    • Aruba OS‑CX features: REST API, AOS scripting, NAE, BGP/OSPF, VSX, QoS, Dynamic Segmentation


Reliability & Performance

The JL687A module is designed for enterprise and data center scalability, delivering deterministic wire-speed switching across all ports without contention. Its cut-through architecture supports consistent forwarding at 25 Gb/s per port with minimal latency. Interface grouping ensures predictable behavior and prevents mixed-speed misconfiguration errors; group mismatches trigger fault alerts and amber LEDs to aid troubleshooting.With Aruba's Virtual Switching Extension (VSX), paired chassis provide active-active resilience, enabling uninterrupted service during software upgrades and hardware maintenance. Advanced Layer 3 routing and multicast protocols operate at scale, supported by Aruba OS‑CX’s programmable CLI, RESTful APIs, automation-ready microservices architecture, and real-time optics and telemetry from NAE. The module performs reliably under full line-rate conditions, leveraging redundant chassis fans and power supplies and compatible management modules. It integrates with Aruba's orchestration tools for orchestration, configuration verification, and fabric provisioning workflows.

Key Features :

    • 32 × 1/10/25 Gb SFP28 ports

    • Interface-group speed configuration (4-port groups)

    • Fully compatible with Aruba CX 8400 (8‑slot chassis)

    • High throughput: 1.2 Tbps per slot, 19.2 Tbps total

    • Aruba OS‑CX features: VSX, BGP/OSPF, QoS, Dynamic Segmentation

    • RESTful APIs and programmable automation support

SpecificationDetails
Model Number JL687A (8400X‑32Y)
Product Type 32‑port SFP28 Expansion Module for CX 8400
Port Speeds 1 Gb, 10 Gb, or 25 Gb (per interface-group config)
Interface Grouping 8 groups of 4 ports; must be uniform speed per group
Compatible Chassis Aruba CX 8400 8‑slot chassis
Switch Fabric Capacity ~1.2 Tbps per slot; 19.2 Tbps total
Supported Features Layer 2/3, BGP, OSPF, VRF, ECMP, QoS, VSX, REST API, NAE
Dimensions (H×W×D) ~1.7″ × 11.9″ × 16.6″ (4.3 × 30.2 × 42.2 cm)
Weight ~4.9 kg (10.8 lb)
Ports 32 × SFP28 slots
Power / Cooling Utilizes chassis shared PSU and fans
LED Indicators Health LEDs per module and per interface-group
Warranty Standard HP module warranty
  • All packages are shipped same day if the order is placed before 3PM CST

    We use UPS/FedEx to ship the packages with different service levels offered by UPS/FedEx

    Overnight Shipping take 1 business day
    Expedited Shipping take about 2-3 business days
    Ground shipping take about 3-5 business days

    You can select the desired service level at Checkout and we will make sure the package is shipped as per the selected service level.

  • We Accept

    i) PayPal
    ii) All Credit & Debit Cards
    iii) Purchase Orders
    iv) Check
    v) Bank Transfer/ACH/Wire Transfer

    To process the order through Paypal/CC, you can simply checkout and process the payment.

    If you want to issue us Purchase Order/Check/Bank Transfer, Please contact us at the following details

    Call: 469.458.9636
    Email: sales@dcsupplies.net

  • If you have any queries, please contact us at the following details and we will be happy to help

    Call
    469.458.9636
    469.458.9638

    Email
    sales@dcsupplies.net

Close