NETGEAR 10-Port PoE 10G Multi-Gigabit Smart Switch (MS510TXPP-100NAS) - Managed, with 8 x PoE+ @ 180W, 1 x 10G, 1 x 10G SFP+, Desktop or Rackmount, and Limited Lifetime Protection
Overview MS510TXPP-100NAS:
Introducing a new Gigabit, Multi-Gigabit and 10-Gigabit Smart Managed Pro Switch Family for future-proof deployments
Businesses need to be ready for future expansion: with incoming new multispeed devices, their wired network needs to expand its reach and scope to support speeds greater than 1 Gigabit. The IEEE 802.3bz standard paved the way for new 2.5 Gigabit and 5 Gigabit speeds in addition to legacy 1 Gigabit and 10 Gigabit per second. New servers, workstations, storage devices, and motherboards are coming with 802.3bz (NBASE-T) Multi-Gigabit Ethernet for 2.5X to 5X faster speeds up to 100 meters (323 feet) on legacy CAT5e / CAT6 cables.
That is why NETGEAR MS510TXPP-100NAS launched its new Multi-Gigabit Smart Managed Pro Switches with 10G Copper/Fiber Uplinks. Each port automatically detects which speed is needed by the connected device and provides the adequate speed. As opposed to regular 10-Gigabit switches that will only provide 1-Gigabit connectivity to any device that requires less than 10-Gigabit, the MS510TX and MS510TXPP give the exact speed required, with no downgrade. Also, the new NETGEAR MS510TXPP-100NAS Multi-Gigabit switch ports can connect regular CAT5e Ethernet cables, without the need to upgrade to CAT6 wiring, therefore reducing wiring costs and hassle.
Access, Aggregation or Collapsed Core: You can now have your PCs, printers and routers/firewalls connected at 1G and aggregate Multi-Gigabit Ethernet new devices on the same switch, all line-rate. 10G copper and fiber ports are ready for local servers and storage, or high-speed aggregation to your network core.
Features MS510TXPP-100NAS:
- MS510TXPP: 180W PoE budget available across 8 Gigabit and Multi-Gigabit PoE+ ports (802.3at)
- Multi-Gigabit, multi-speed ports to connect any type of device to a single switch
- Quiet desktop operation or rack mounting with 21dB (MS510TX) or 28.8dB max (MS510TXPP) at 25°C (77°F) ambient
- Layer 3 static routing with 32 routes (IPv4 and IPv6) for interVLAN local routing
- Non-blocking 78Gbps fabric for 2x5Gbps+ 2x2.5Gbps+4x1Gbps+2x10Gbps full duplex switching and routing
- Advanced VLAN support for better network segmentation
- L2/L3/L4 access control lists (ACLs) for granular network access control including 802.1x port authentication
- MS510TXPP: Advanced per port PoE controls for remote power management of PoE connected devices including operation scheduling (e.g. Wireless APs, IP security cameras, LED lighting, secure access door locks, IoT devices...)
- Advanced QoS (Quality of Service) for traffic prioritization including port-based, 802.1p and L2/L3/L4 DSCP-based
- Auto "denial-of-service" (DoS) prevention
Specifications MS510TXPP-100NAS:
Interfaces MS510TXPP-100NAS
| Inputs/Outputs |
4 x 10/100/1000 Mb/s Gigabit Ethernet (RJ45) PoE+
2 x 2.5 Gb/s Ethernet (RJ45) PoE+
2 x 5 Gb/s Ethernet (RJ45) PoE+
1 x 10Gb Ethernet (RJ45) (Uplink)
1 x 10Gb SFP+
1 x USB-A |
Protocols MS510TXPP-100NAS
| Layer Services Supported |
Layer 2 Support, Layer 3 Support |
| Supported Protocols |
Auto-MDIX/MDI
IGMP Snooping
IPv4
IPv6
Port Mirroring
RADIUS
SNMPv1
SNMPv2c
SNMPv3 |
| Queuing |
Strict Priority, Weighted Round Robin (WRR) |
| Transmission Method |
Store-and-Forward |
| Jumbo Frames Support |
10,000 Bytes |
| MAC Address Table Size |
16K |
| Multicast Groups |
512 |
| VLAN Groups |
256 |
Security MS510TXPP-100NAS
| Security Features |
DHCP Snooping
DoS Attack Prevention |
| Access Control List |
164 |
| Static Routes |
32 |
| SNMP Support |
1, 2c, 3 |
Standards MS510TXPP-100NAS
| RFC |
RFC 3164 |
| Supported IEEE Standards |
802.1ab, 802.1d, 802.1p, 802.1s, 802.1w, 802.1x, 802.3, 802.3ab, 802.3ad, 802.3ae, 802.3an, 802.3az, 802.3q, 802.3u, 802.3x, 802.3z |
Performance MS510TXPP-100NAS
| Latency |
2.4 to 19.4 µs |
| Forwarding Rate |
58 Mpps |
| Switching Bandwidth |
78 Gb/s (Non-Blocking) |
| Priority Queues |
8 |
| Packet Buffer |
1.5 MB |
Computer MS510TXPP-100NAS
| Flash Memory |
256 MB |
| RAM Buffer |
512 MB per Device |
| CPU |
to 800 MHz Dual-Core |
| Memory |
512 MB |
Electrical MS510TXPP-100NAS
| Power Draw |
234.31 W (Max) |
| PoE Power Budget |
180 W |
| PoE per Port |
32 W |
Environmental MS510TXPP-100NAS
| Operating Temperature |
32 to 82°F / 0 to 50°C |
| Operating Humidity |
95% |
| Storage Temperature |
-4 to 158°F / -20 to 70°C |
| Storage Humidity |
95% |
| Operating Altitude |
10,000' / 3048 m |
| Storage Altitude |
10,000' / 3048 m |
| Noise Level |
28.8 dB |
General MS510TXPP-100NAS
| Cooling System |
Fan |
| Mean Time Between Failures (MTBF) |
376,434 Hours |
| Indicator Lights |
Fan, Link/Activity/Speed, PoE, Power |
| Dimensions |
13 x 8.1 x 1.7" / 330 x 206 x 43 mm |
| Weight |
5.53 lb / 2.51 kg |
Packaging Info MS510TXPP-100NAS
| Package Weight |
5.85 lb |
| Box Dimensions (LxWxH) |
18 x 9 x 3" |
