| D-Link DGS-1510-28XMP Specifications |
|---|
| Port Standards & Functions |
IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, 802.3ae 10 GbE, IEEE 802.3x Flow Control for Full-Duplex Mode, Auto-negotiation |
| Number of Ports |
24 10/100/1000 Mbps PoE capable, 4 10G SFP+ |
| Network Cables |
UTP Cat. 5, Cat. 5e (100 m max.) EIA/TIA-568 100-ohm STP (100 m max.) |
| Full/Half Duplex |
Full/half duplex for 10/100 Mbps and Gigabit speed |
| Media Interface Exchange |
Auto or configurable MDI/MDIX |
| Switching Capacity |
128 Gbps |
| Transmission Method |
Store-and-forward |
| MAC Address Table |
Up to 16,000 entries per device |
| MAC Address Update |
Up to 512 static MAC entries, Enable/disable auto-learning of MAC addresses |
| Maximum 64 bytes Packet Forwarding Rate |
95.24 Mpps |
| Packet Buffer Memory |
1.5 MB per device |
| MTBF |
274796.39 hours |
| PoE Standard |
IEEE 802.3af, 802.3at PoE Capable |
| PoE Capable Ports |
Ports 1 to 24: Up to 30 W |
| PoE Power Budget |
Max. 370 W |
| AC Input |
100 to 240 VAC 50/60 Hz internal universal power supply |
| Maximum Power Consumption |
436.3 W (PoE on), 38.4 W (PoE off) |
| Standby Power Consumption |
28.3 W |
| Smart Fan Quantity |
2 |
| Acoustics |
56.9 dB(A) |
| Heat Dissipation |
1487.783 BTU/hr |
| Operation Temperature |
23 to 122 ˚F (-5 to 50 ˚C) |
| Storage Temperature |
-4 to 158 ˚F (-20 to 70˚C) |
| Operation Humidity |
0% to 95% non-condensing |
| Storage Humidity |
0% to 95% non-condensing |
| Dimensions |
440 x 308 x 44 mm ( 17.36 x 12.12 x 1.73 inches)
19" standard rack mounting width, 1U height |
| Weight |
4.25 kg |
| Diagnostic LEDs |
Power/Stacking ID/Fan Error/PoE Push Button (per device), Link/Activity/Speed/PoE Mode (per 10/100/1000 Mbps port), Link/Activity/Speed (per SFP port), Link/Activity/Speed (per 10G SFP+ port) |
| Certifications |
CE, FCC, C-Tick, VCCI, BSMI, CCC, IPv6 Ready Logo Phase 2 |
| Safety |
