APC SMT1500C FAQ: Specifications, Runtime, Battery and Features
The APC SMT1500C Smart-UPS is a 120V line-interactive tower UPS designed to provide backup power and power protection for servers, networking equipment, storage systems, VoIP equipment, desktops, retail POS systems, and other critical electronic equipment.
The SMT1500C provides 1440VA / 1000W of rated capacity and includes Automatic Voltage Regulation (AVR), pure sine wave output, eight NEMA 5-15R outlets, a NEMA 5-15P input, and SmartConnect connectivity. Schneider Electric lists the SMT1500C as a line-interactive, pure sine wave tower UPS for IT and business applications.
If you are looking to purchase this UPS, see the APC SMT1500C Smart-UPS product page for current pricing, availability, and complete product specifications.
The APC SMT1500C is a Smart-UPS line-interactive tower UPS designed to provide backup power and power protection for compatible IT and electronic equipment.
It is designed for applications including servers, storage, network closets, business VoIP equipment, desktops, and retail POS systems.
How many watts is the SMT1500C?
The SMT1500C has a rated output capacity of 1000 watts.
Its rated apparent power capacity is 1440VA.
When sizing the UPS, both the watt and VA ratings should be considered. The total connected equipment should remain within the rated limits of the UPS.
Is the SMT1500C really a 1500VA UPS?
The product model and product family are marketed as a 1500VA Smart-UPS, while Schneider Electric's current technical specifications list the SMT1500C's rated and maximum configurable capacity as 1440VA / 1000W.
For technical sizing, use the manufacturer's current electrical ratings rather than assuming that the model name represents the maximum configurable VA rating.
What voltage does the SMT1500C use?
The SMT1500C is designed for 120V AC single-phase input and provides 120V AC single-phase output.
How many outlets does the SMT1500C have?
The SMT1500C provides 8 NEMA 5-15R output outlets.
The UPS uses a NEMA 5-15P input connector.
Is the SMT1500C line-interactive?
Yes. The SMT1500C uses line-interactive UPS technology.
The UPS also incorporates Automatic Voltage Regulation to help correct certain utility voltage conditions without unnecessarily switching to battery operation.
Does the SMT1500C provide pure sine wave output?
Yes. Schneider Electric identifies the SMT1500C as a pure sine wave line-interactive tower UPS.
Does the SMT1500C have SmartConnect?
Yes. The SMT1500C includes SmartConnect connectivity for compatible remote UPS monitoring and management capabilities.
The unit also provides USB and serial communication options.
What battery does the SMT1500C use?
The SMT1500C uses a lead-acid battery.
Schneider Electric lists a dedicated replacement battery cartridge for the SMT1500C, allowing the battery to be replaced when required.
How long does the SMT1500C run?
Runtime depends on the amount of equipment connected to the UPS.
Schneider Electric publishes runtime information based on connected load. At a 1000W load, the published specification lists a runtime figure of approximately 6 minutes 30 seconds under the stated test conditions.
Actual runtime can vary depending on load, battery condition, environmental conditions, and other factors.
Is the SMT1500C a tower or rackmount UPS?
The SMT1500C is a tower UPS.
It is designed for freestanding installation rather than installation in a standard rackmount chassis.
Is SMT1500C suitable for servers?
The SMT1500C is designed for IT applications including servers, storage, networking equipment, VoIP systems, and other critical loads.
The important consideration is the electrical load. The connected equipment should remain within the UPS's 1000W / 1440VA rated capacity.
What are the SMT1500C dimensions?
The supplied product specifications list the dimensions as:
Width: 6.7 inches
Depth: 17.3 inches
Height: 8.6 inches
Weight: 24.6 kg
Always verify physical dimensions against the manufacturer's current documentation before final installation planning.
Is the SMT1500C a good UPS for network equipment?
The SMT1500C is designed for applications involving network equipment, network closets, servers, storage systems, and other IT infrastructure. Schneider Electric specifically identifies network closets and network equipment among its intended applications.
Where can I buy the APC SMT1500C?
The APC SMT1500C Smart-UPS is available through authorized and professional IT equipment suppliers.
For current pricing, availability, and product specifications, see the APC SMT1500C product page at DC Supplies.
SMT1500C Specifications
| Specification | Details |
|---|
| Model | SMT1500C |
| UPS Technology | Line-interactive |
| Form Factor | Tower |
| Rated Power | 1000W / 1440VA |
| Input Voltage | 120V AC |
| Output Voltage | 120V AC |
| Input Connector | NEMA 5-15P |
| Output Connections | 8 × NEMA 5-15R |
| Waveform | Pure sine wave |
| Battery | Lead-acid |
| Communication | SmartConnect, USB, Serial |
| Width | 6.7 inches |
| Depth | 17.3 inches |
| Height | 8.6 inches |
| Weight | 24.6 kg |
Final Considerations
The APC SMT1500C is a practical choice when you need a 120V tower UPS with line-interactive technology, AVR, pure sine wave output, SmartConnect connectivity, and 1000W of rated output capacity.
Before purchasing, calculate the actual wattage of the equipment that will be connected to the UPS and compare that load with the SMT1500C's rated capacity.
For current pricing and availability, visit the APC SMT1500C product page.
Comments (0)
No comment