Do you have a list of products you are looking to source?
Send us the whole list and get Special discounted prices
ICX7150-48ZP-E8X10GR
New
In Stock
Warning: Last items in stock!
Availability date:
dc supplies, Gigabit Ethernet Switch, Rack-mountable Switch, 48-Port Switch, Enterprise-grade switch, Ruckus Data Center Solutions, ICX7150-48ZP-E8X10GR, Ruckus ICX7150-48ZP-E8X10GR, ICX7150-48ZP-E8X10GR switch, Z-Series switch
The Ruckus® ICX® 7150 family of stackable switches delivers the performance, flexibility, and scalability required for enterprise access deployment, raising the bar with non-blocking performance and up to 8×10 GbE ports for uplinks or stacking. It offers seamless interoperability with Ruckus wireless products to deliver unified wired and wireless network access. In addition, Ruckus Multigigabit Ethernet technology offers bandwidth speeds needed to optimize performance of the latest generation high performance wireless access points and edge devices, over standard Ethernet cables.
Ruckus stacking technology makes it possible to stack up to twelve Ruckus ICX 7150 switches into a single logical switch. This allows the Ruckus ICX 7150 to deliver a class-leading 480 Gbps of aggregated stacking bandwidth and offer simple and robust expandability for future growth. Stacking is supported across the ICX 7150 family and all ICX 7150 models including the ICX 7150 compact switch and the ICX 7150-48ZP can be mixed within the same stack. This stacked switch has only a single IP address that simplifies management and offers transparent forwarding across up to 600×1 GbE ports or up to 192×2.5 GbE ports, and up to 96×10 GbE ports. When new switches join the stack, they automatically inherit the stack’s existing configuration file, enabling a plug-and-play network expansion.
Because the ICX 7150-48ZP switch has twice as many uplink ports, when it is added to a stack of other ICX 7150 switch models, the effective bandwidth of all the switches is doubled. By designing the stack this way, all four of the 10GbE ports on the ICX 7150 switches can be used for stacking (rather than having to split the four ports between stacking and uplinks), and leveraging four of the 10GbE ports on the ICX 7150-48ZP for stacking and the other four 10GbE ports can be used for uplinks.
Device Type | Switch - 48 ports - L3 - managed - stackable |
Enclosure Type | Front to back airflow rack-mountable 1U |
Subtype | 2.5 Gigabit Ethernet |
Ports | 16 x 100/1000/2.5G (PoH) + 32 x 10/100/1000 (PoE+) + 8 x 10 Gigabit SFP+ (uplink) |
Power Over Ethernet (PoE) | PoH / PoE+ |
PoE Budget | 740 W |
Performance | Switching capacity (full duplex): 304 Gbps ¦ Forwarding performance (full duplex): 226 Mbps ¦ Aggregate stacking bandwidth: 480 Gbps |
Capacity | Switches in a stack: 12 ¦ MAC addresses: 16384 ¦ VLANs supported: 4095 ¦ PVLANs supported: 32 ¦ STP instances: 254 ¦ ARP entries: 4094 ¦ IPv6 routes: 1000 ¦ IPv4 routes: 1000 ¦ Next hop address: 4094 ¦ Trunk groups: 128 ¦ Ports per trunk group: 16 ¦ Jumbo frame size: 9216 ¦ QoS priority queues per port: 8 ¦ Layer 2 multicast groups: 3072 ¦ Layer 3 multicast groups: 2048 ¦ Port Extenders (PE) per fabric: 36 ¦ Port Extender (PE) cascade depth (units): up to 6 |
Jumbo Frame Support | Yes |
Routing Protocol | OSPF, RIP, RIP-1, RIP-2, IGMPv2, IGMP, VRRP, static IP routing, IGMPv3, ECMP, policy-based routing (PBR), RIPng |
Remote Management Protocol | SNMP 1, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, SSH-2, CLI, NTP |
Encryption Algorithm | AES |
Authentication Method | Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2) |
Features | Flow control, layer 2 switching, auto-sensing per device, power over Ethernet (PoE), BOOTP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, High Availability, firmware upgradable, SNTP support, DDos attack prevention, Metro Ring Protocol (MRP) support, sFlow, Per-VLAN Spanning Tree (PVST), PIM-SM snooping, Remote Fault Notification (RFN), IP Precedence, SSH support, Jumbo Frames support, MLD snooping, PoE+, Trusted Platform Module (TPM), Per-VLAN Spanning Tree Plus (PVST+), Equal-Cost Multipath (ECMP), Uni-Directional Link Detection (UDLD), IPv4 support, hot swappable dual fans, LLDP support, Link Aggregation Control Protocol (LACP), Management Information Base (MIB), MAC address lockout, Dynamic VLAN Support (GVRP), Class of Service (CoS), Strict Priority (SP), Generic Attribute Registration Protocol (GARP), IGMP proxy, redundant fans, GARP VLAN Registration Protocol (GVRP), Type of Service (ToS), DiffServ Code Point (DSCP) support, hot swappable power supply, OpenFlow support, Extended Fabric, power over HDBaseT (PoH), rate limit, AES encryption, MAC address learning, MAC address authentication, Authentication, Authorization and Accounting (AAA), Static Link Aggregation, VLAN Double Tagging (Q-in-Q), Root Guard, VLAN mirroring, Private VLAN, IGMP fast leave, STP BPDU Guard, MAC based VLAN, loopback detection, Hybrid OpenFlow 1.3, VLAN Tagging, MAC address mapping |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.1AX, IEEE 802.1BR, IEEE 802.3bz |
RAM | 1 GB |
Flash Memory | 2 GB |
Status Indicators | Power, status |
Interfaces | 16 x 100/1000/2.5G RJ-45 PoH - 15.4 W ¦ 32 x 10/100/1000 Base-T RJ-45 PoE+ ¦ 8 x 10Gbit LAN SFP+ ¦ 1 x management (LAN) RJ-45 ¦ 1 x console (USB) Type C management ¦ 1 x serial (console) RJ-45 management ¦ 1 x USB Type A |
Power Device | Internal power supply - hot-plug |
Installed Qty | 1 (installed) / 2 (max) |
Power Redundancy | Optional |
Power Redundancy Scheme | 1+1 (with optional power supply) |
Power Provided | 920 Watt |
Voltage Required | AC 100 - 240 V (50/60 Hz) |
All packages are shipped same day if the order is placed before 3PM CST
We use UPS/FedEx to ship the packages with different service levels offered by UPS/FedEx
Overnight Shipping take 1 business day
Expedited Shipping take about 2-3 business days
Ground shipping take about 3-5 business days
You can select the desired service level at Checkout and we will make sure the package is shipped as per
the selected service level.
We Accept
i) PayPal
ii) All Credit & Debit Cards
iii) Purchase Orders
iv) Check
v) Bank Transfer/ACH/Wire Transfer
To process the order through Paypal/CC, you can simply checkout and process the payment.
If you want to issue us Purchase Order/Check/Bank Transfer, Please contact us at the following
details
Call: 469.458.9636
Email: sales@dcsupplies.net
If you have any queries, please contact us at the following details and we will be happy to help
Call
469.458.9636
469.458.9638
Email
sales@dcsupplies.net