Detailed Specifications
Overview
The Ubiquiti POE-24-12W-G-WH is a 24V DC passive Power over Ethernet injector designed to provide power and network connectivity to compatible devices. It delivers 24V DC at 0.5A and supports Gigabit Ethernet connectivity.
Power and Connectivity
The injector accepts 100–240V AC input at 50/60Hz and provides 24V DC output through 2-pair passive PoE. Its Gigabit Ethernet interface supports data connectivity for compatible network equipment.
Key Features
- 24V DC output at 0.5A
- 12W maximum output power
- Gigabit Ethernet connectivity
- 2-pair passive PoE powering
- Integrated surge and clamping protection
Applications
The POE-24-12W-G-WH is intended for compatible 24V passive PoE equipment requiring Ethernet data and DC power through a single network cable.
DC Supplies Product Note
Verify the powered device specifically supports 24V passive PoE before installation. This injector should not be treated as a universal IEEE 802.3af/at/bt PoE source.
Specifications
| Specification | Details |
|---|
| Brand | Ubiquiti |
| Part Number / MPN | POE-24-12W-G-WH |
| Product Type | Passive PoE Injector |
| Output Voltage | 24V DC |
| Output Current | 0.5A |
| Output Power | 12W |
| Ethernet Interface | Gigabit Ethernet |
| Powering Method | 2-pair passive PoE |
| Input Voltage | 100–240V AC |
| Input Frequency | 50/60Hz |
| AC Connector | IEC-320 C6 |
| Remote Reset | Supported |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Operating Humidity | 35–95% non-condensing |
| Certifications | CE, FCC, IC, UL |
| Dimensions | 3.48 × 1.81 × 1.30 in |
| Weight | 0.165 lb |
Frequently Asked Questions
What voltage does the POE-24-12W-G-WH provide?
It provides 24V DC at 0.5A, with a rated output power of 12W.
Does this injector support Gigabit Ethernet?
Yes. The POE-24-12W-G-WH provides Gigabit Ethernet connectivity.
Is this a passive PoE injector?
Yes. It uses 24V passive PoE with 2-pair powering.
Can it power any PoE device?
No. The connected device must specifically support 24V passive PoE and meet the injector's electrical requirements.
