APC BN450M-CA Back-UPS 450VA Standby UPS
Overview :
The APC BN450M-CA is a compact standby (offline) uninterruptible power supply (UPS) designed to provide basic battery backup and surge protection for home and small office IT equipment, networking devices, and consumer electronics. IT administrators and technical users typically deploy this model to maintain momentary power continuity during brief outages and to protect against voltage spikes and electrical noise that can damage sensitive hardware.
This UPS delivers 450 VA / 255 W output capacity with a square-wave output suitable for low-to-moderate loads such as desktops, routers, modems, and small NAS devices. The unit operates in a 120 V electrical ecosystem with an input voltage range of approximately 88-139 V AC. Four outlets offer combined battery backup + surge protection while two outlets are surge-only, allowing critical and non-critical gear to be connected simultaneously.
As a tower form factor, the BN450M-CA fits under desks or in compact equipment spaces where rack infrastructure is not required. Its standby topology provides instantaneous transfer to battery power during utility interruptions, with a typical transfer time of around 4-10 ms. Visual LED indicators and audible alarms inform users of power status, battery mode, and fault conditions.
For small business or home office deployments, this UPS protects critical peripherals long enough for graceful shutdown of connected systems or to bridge to a generator. Recharge time for the internal sealed lead-acid battery is typically ≈ 8 hours after a complete discharge.
However, due to its limited output capacity and square-wave output, the BN450M-CA is not suitable for rack servers, high-density compute loads, or sustained runtime needs. Environments requiring extended backup or support for active-PFC power supplies should consider higher-capacity or sine-wave models.
Key Features
• 450 VA / 255 W standby UPS with basic battery backup
• Four battery + surge outlets, two surge-only outlets
• Compact tower design for desktop or under-desk placement
• LED indicators and audible alarms for status feedback
• ≈ 8 hour battery recharge after full discharge
Specifications
| Specification | Details |
|---|
| Brand | APC |
| Part Number | BN450M-CA |
| Product Type | Standby (Offline) UPS |
| UPS Capacity | 450 VA / 255 W |
| Topology | Standby with AVR (Basic) |
| Output Waveform | Square Wave |
| Nominal Input Voltage | 120 V AC |
| Input Voltage Range | 88 - 139 V AC |
| Input Connector | NEMA 5-15P |
| Output Connections | 6 × NEMA 5-15R |
| Battery Backup Outlets | 4 |
| Surge-Only Outlets | 2 |
| Transfer Time | ~4 - 10 ms typical |
| Surge Protection | Yes |
| Battery Type | Sealed Lead-Acid (VRLA) |
| Typical Recharge Time | ~8 hours |
| Runtime (Full Load) | ~2.6 minutes |
| Dimensions (H × W × D) | ~5.5 × 10.0 × 4.1 in |
| Weight | ~5.7 lb (2.6 kg) |
| Operating Temp. | 0 - 40 °C |
| Audible Indicators | Yes |
| Warranty | 3 years |
