Do you have a list of products you are looking to source?
Send us the whole list and get Special discounted prices
The HPEJG316A (5830AF-48G) is a 1 U rack-mount fully Managed switchFlexFabric switch offering 48 auto-MDIX Gigabit Ethernetports, plus four high-speed uplink options via two dual-personality RJ-45/SFP slots and two dedicated SFP+ 10 GbE ports. Engineered for enterprise-access and data center top-of-rack deployments, it delivers high port density, rich Layer 2/3 feature sets × including IPv4/IPv6 dual stack, routing protocols (BGP, OSPF, RIP), ACLs, QoS, and IRF stacking × while supporting flexible airflow and redundant hot-swappable fans and power supplies. Designed to simplify network architecture via FlexFabric and IRF, this switch is ideal for scalable, resilient campus or branch environments.
Built on Comware-based operating systems, the 5830AF-48G supports a rich set of enterprise protocols including virtual router redundancy (VRRP), Rapid Ring Protection Protocol (RRPP), SPANNING TREE variants (RSTP, MSTP, PVST+), Device Link Detection Protocol (DLDP), endpoint admission defense (EAD), and Equal-Cost Multi-Path routing (ECMP) for redundancy and high availability. Its deep packet buffer (1 GB or more depending on module level) helps avoid congestion spikes in virtualized or multimedia-dense environments.Key hardware specs include 1 GB RAM and 64 MB flash memory. Management options include HTTPS Web GUI, CLI/SSH, SNMP v1/v2c/v3, RMON, Telnet, and management VLAN isolation. sFlow supports scalable, wire-speed monitoring for capacity planning. Dual airflow configurations (front-to-back or back-to-front) and redundant power/fan modules align with data center hot/cold aisle layouts.
Performance specs: SCALABLE switching throughput at line rate across all ports with hardware-based TCAM ACL forwarding, jumbo frame support (up to 9 KB) on all gigabit and 10 GbE ports. Multicast tables support up to 2,000 IPv4 and 1,000 IPv6 entries; VLAN tables scale to 4,000 entries; ACL capacity of 8,000 ingress and 512 egress per gigabit port.
48 × autosensing 10/100/1000Base-T ports
2 × dual-personality RJ-45/SFP (1 GbE) + 2 × dedicated SFP+ 10 GbE uplinks
FlexFabric architecture with IRF stacking support
IPv4/IPv6 dual-stack routing: OSPF, BGP4+, RIP/RIP2, static routes
Redundancy protocols: VRRP, RRPP, DLDP, ECMP, EAD
Deep packet buffer (~1 GB), jumbo frames, sFlow, QoS, ACL, port mirroring
The TAA-compliant JG316A supports BladeSystem server and storage fabric convergence leveraging FlexFabric architecture. Whether deployed as edge switch or part of IRF stacks, it delivers enterprise-grade Layer 3 routing and high resilience with simplified management.
48 × RJ-45 Gigabit ports; 2 × dual-personality RJ-45/SFP + 2 × SFP+ 10 GbE uplinks
FlexFabric with IRF stacking and unified management
Rich L2/L3 feature set including BGP, OSPF, VRRP, QoS, ACL
sFlow, jumbo frame support, deep packet buffer (~1 GB)
Redundancy via DLDP, RRPP, ECMP, redundant PSUs & fans
| Specification | Details |
|---|---|
| Model Number | JG316A (HPE5830AF-48G FlexFabric Switch) |
| Product Type | Managed switchL2/L3 Gigabit switch, 1 U rack-mountable |
| Fixed Ports | 48 × 10/100/1000Base-T auto-MDIX |
| Uplink Ports | 2 × shared RJ-45/SFP; 2 × dedicated SFP+ 10 GbE uplinks |
| Switching Fabric | ~1 GB packet buffer; non-blocking, line-rate forwarding |
| Routing Protocols | IPv4/IPv6, static, RIP, OSPF, BGP4+, multicast (PIM-SM/DM), MLD |
| Redundancy/HA Features | IRF stacking, VRRP, RRPP, ECMP, DLDP, EAD |
| Multicast Capacity | L2 IPv4: 2K; L2 IPv6: 1K; L3 IPv4: 2K; L3 IPv6: 1K |
| VLAN / ACL Capacity | VLANs: 4K; ACL ingress: 8K (GigE), egress: 512 |
| Memory | 1 GB DRAM / 64 MB flash |
| Management Interfaces | CLI/SSH, HTTPS Web GUI, SNMP v1/2c/3, RMON, Telnet, management VLAN |
| Monitoring Tools | sFlow support |
| Jumbo Frame Support | Up to 9 KB |
| Power & Cooling | Redundant PSUs/fans; front-to-back or back-to-front airflow |
| Compliance | TAA (US), RoHS, WEEE |
| Dimensions (H×W×D) | ~1.7″ × 17.3″ × 18.1″ |
| Weight | ~14.5 lb (~6.6 kg) |
| Warranty | OEM warranty (new), ~90 day refurb |

All packages are shipped same day if the order is placed before 3PM CST
We use UPS/FedEx to ship the packages with different service levels offered by UPS/FedEx
Overnight Shipping take 1 business day
Expedited Shipping take about 2-3 business days
Ground shipping take about 3-5 business days
You can select the desired service level at Checkout and we will make sure the package is shipped as per the selected service level.
We Accept
i) PayPal
ii) All Credit & Debit Cards
iii) Purchase Orders
iv) Check
v) Bank Transfer/ACH/Wire Transfer
To process the order through Paypal/CC, you can simply checkout and process the payment.
If you want to issue us Purchase Order/Check/Bank Transfer, Please contact us at the following details
Call: 469.458.9636
Email: sales@dcsupplies.net
If you have any queries, please contact us at the following details and we will be happy to help
Call
469.458.9636
469.458.9638
Email
sales@dcsupplies.net