HPER0P82-63001

SN2100M 100 GbE Managed switch - 16 × QSFP28 Ports

The HPER0P82-63001 is the factory SKU for the SN2100M M-Series 100 GbE switch, featuring 16 fixed QSFP28 ports for high-performance Ethernet environments. This half-rack-width 1U switch delivers line-rate switching at up to 100 GbE per port, with multi-speed support including 1/10/25/40/50 GbE via breakout configurations. Optimized for dense data center applications, including flash storage, NVMe-over-Ethernet, AI, and hyper-converged systems, the SN2100M provides 3.2 Tbps switching capacity, cut-through latency of ~300 ns, and supports side-by-side deployment for mirrored fabrics. As a fully managed device, it supports advanced Layer 3 routing, MLAG, VXLAN, ACL/QoS, and automation interfaces for agile network design.

Features

The SN2100M switch (R0P82-63001) includes 16 QSFP28 ports, each capable of native 100 GbE and flexible breakout to 50 GbE or 4×25 GbE or 4×10 GbE via optical or direct-attach cables. The non-blocking 3.2 Tbps fabric delivers consistent throughput regardless of traffic mix or packet size, while two units mounted side-by-side in a single rack unit double density to 32 ports, 6.4 Tbps, and ~4.76 Bpps forwarding capacity. Typical power draw is under 95 W per unit, making it highly efficient. The P2C airflow and half-width form factor equip data centers with compact reliability.

Advanced Options

Layer-2 and Layer-3 capabilities include MLAG redundancy, BGP, OSPF, VRF, VXLAN routing, DCB features (PFC, ETS, DCBX), ACLs, and QoS. Management via CLI, REST API, or ONIE open-installer offers flexibility for automation and orchestration in modern environments. SN2100M is tailored for environments where performance, scale, and efficiency matter.Built for mission-critical data center environments, the SN2100M offers wire-speed packet delivery with zero frame loss across all ports and packet sizes×essential for storage fabrics and flash workloads. The dynamic shared buffer and cut-through design ensure latency is minimized and congestion is handled predictably.

Product Key Features

• 16 fixed QSFP28 ports, breakout-able to multi-speed via DAC/optics

• Native support for 1/10/25/40/50/100 GbE protocols

• 3.2 Tbps non-blocking switching fabric; dual-unit side-by-side boosts to 6.4 Tbps

• Ultra-low forwarding latency (~300 ns cut-through architecture)

• Advanced L3 features: MLAG, BGP/OSPF, VXLAN, ACLs, QoS

• Side-by-side 1U deployment (half-width) with P2C airflow and low power (<95 W)

---

Reliability & Performance

Side-by-side configuration allows two switches in one rack unit×delivering active-active redundancy and increased port density without increasing rack footprint or power draw. Coupled with MLAG and VXLAN support, the architecture supports scale-out topologies with streamlined fault tolerance. Energy-efficient thermal performance (P2C airflow) and <95 W typical power consumption reduce operational costs and cooling load.Enterprise software features like DCB for iSCSI/RoCE, ECMP routing, container support, and ACL-based security make it ideal for converged infrastructure. Management interfaces support automation and integration with orchestration tools via Restful APIs or CLI.

Key Features :

• 16 × QSFP28 ports supporting 100 GbE and lower-speed breakout

• Flexible multi-rate support (1/10/25/40/50/100 GbE)

• Shared buffer fabric, 3.2 Tbps switching, ~300 ns latency

• Layer-3 routing, VXLAN, MLAG, ACLs, QoS, DCB features

• Automation support via CLI/REST/ONIE

• Half-width 1U P2C design; low power, side-by-side redundancy

Specification	Details
Model Number	R0P82-63001 (HP SN2100M 16-port QSFP28 switch)
Product Type	Managed switch100 GbE Ethernet Switch1U half-width rack mount
Ports	16 × QSFP28 (fixed)
Supported Speeds	1/10/25/40/50/100 GbE per port (via breakout cables/optics)
Switching Capacity	3.2 Tbps (single); 6.4 Tbps (dual units)
Packet Throughput	≈ 4.76 billion packets/sec (dual config)
Latency	~300 ns port-to-port (cut-through)
Layer-3 Features	BGP, OSPF, VRF, MLAG, VXLAN, ACLs, QoS
DCB Features	PFC, ETS, DCBX
Management Interfaces	CLI, REST API, ONIE installation support
Power Consumption	Typical under 95 W
Cooling / Airflow	Power-to-Connector (P2C) half-width thermal design
Deployment Form Factor	1U rack, half-width (two units can share 1U)
Warranty	OEM support for new units; ~90-day warranty for refurbished