Detailed Specifications
Eaton SMART700HGL Tripp Lite 700VA Medical-Grade UPS
Overview
The Eaton SMART700HGL is a Tripp Lite by Eaton SmartPro 700VA/450W medical-grade line-interactive UPS designed for healthcare and patient-care environments. It provides battery backup, voltage regulation, surge protection, and full AC isolation for sensitive medical and electronic equipment. Eaton identifies it as approved for use within the Patient Care Vicinity.
The Tripp Lite SMART700HGL uses a 10,000-cycle LiFePO4 battery and provides up to 42 minutes of runtime at half load and 18 minutes at full load. Its built-in isolation transformer with Faraday shield provides full isolation and helps remove common-mode noise while maintaining surge protection.
The UPS provides four hospital-grade NEMA 5-15R-HG outlets, a hospital-grade NEMA 5-15P-HG input plug with a 6 ft. cord, USB and DB9 serial monitoring interfaces, automatic voltage regulation, and a 940-joule surge suppression rating.
Key Features
- Tripp Lite by Eaton 700VA/450W medical-grade line-interactive UPS
- LiFePO4 lithium battery rated for 10,000 cycles
- Provides up to 42 minutes at half load and 18 minutes at full load
- Full isolation transformer with Faraday shield and 940-joule surge protection
- Four hospital-grade NEMA 5-15R-HG outlets and Patient Care Vicinity approval
Specifications
| Specification | Details |
|---|
| Manufacturer | Eaton |
| Brand | Tripp Lite by Eaton |
| Part Number | SMART700HGL |
| Product Type | Tripp Lite Medical-Grade UPS |
| UPS Series | SmartPro |
| Topology | Line-Interactive |
| Capacity | 700 VA / 450 W |
| Input Voltage | 120V AC |
| Nominal Frequency | 60 Hz |
| Input Plug | NEMA 5-15P-HG |
| Input Cord Length | 6 ft. (1.8 m) |
| Output Receptacles | 4 × NEMA 5-15R-HG |
| Battery Type | LiFePO4 Lithium-Ion |
| Battery Voltage | 36V DC |
| Runtime at Half Load | 42 minutes |
| Runtime at Full Load | 18 minutes |
| Surge Protection | 940 joules |
| Isolation Transformer | Hospital-grade load isolation transformer |
| Communication Interfaces | USB, DB9 Serial |
| Automatic Voltage Regulation | Yes |
| Input Voltage Correction Range | 81-143V |
| Output Waveform | Sine wave (AC mode); PWM sine wave (battery mode) |
| Transfer Time | 2-4 ms |
| Leakage Current | ≤100 µA |
| Form Factor | Tower / Wall-Mount |
| Recommended Electrical Service | 15A, 120V |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Compliance | UL 1778, UL Listed, CSA, RoHS, FCC Class A |
| Medical Standards | EN60601-1-2:2015; IEC60601-1-2:2014, 4th Edition |
