Overview
The Ubiquiti UAP-NANOHD-3-US is a three-pack of UniFi nanoHD access points designed for indoor wireless networks requiring compact hardware and high-density 802.11ac Wave 2 connectivity. Each access point provides simultaneous dual-band WiFi, 4x4 MU-MIMO on 5 GHz, 2x2 MIMO on 2.4 GHz, and a Gigabit Ethernet uplink.
Wireless Performance
Each nanoHD access point supports a maximum 5 GHz radio rate of 1.733 Gbps using 4x4 MIMO and up to 300 Mbps on 2.4 GHz using 2x2 MIMO. The current Ubiquiti specifications identify six total spatial streams across the two radios. The access point supports WiFi 5 and simultaneous dual-band operation.
Deployment and Management
The nanoHD is designed for indoor deployment and can be mounted on a wall or ceiling. Each unit uses a single Gigabit Ethernet RJ45 interface for network connectivity and PoE power. Wireless meshing, band steering, fast roaming, BSS transition management, radio resource management, and other UniFi wireless management features are supported through the UniFi Network platform.
Power
The access point supports 802.3af PoE and has a maximum power consumption of 10.5 W. Ubiquiti specifies a supported voltage range of 44–57 V DC. The official documentation notes that the PoE adapter is included with the single-pack; the multi-pack configuration does not include individual PoE adapters, so compatible PoE switching or separately purchased PoE power equipment is required for deployment.
Key Features
- WiFi 5 802.11ac Wave 2 wireless access point with six total spatial streams.
- 4x4 MU-MIMO on 5 GHz with up to 1.7 Gbps radio rate.
- 2x2 MIMO on 2.4 GHz with up to 300 Mbps radio rate.
- Single Gigabit Ethernet uplink with 802.3af PoE power.
- Compact indoor form factor supporting wall or ceiling mounting.
Applications
The UAP-NANOHD-3-US is suited to indoor deployments where multiple access points are required across offices, commercial spaces, hospitality environments, or other managed WiFi installations. Its 5 GHz 4x4 radio architecture is designed for environments with multiple concurrent wireless clients.
DC Supplies Product Note
The UAP-NANOHD-3-US is a multi-pack configuration. Ubiquiti's documentation states that the PoE adapter is included only with the single-pack nanoHD, while multi-packs require a compatible PoE switch or separately purchased PoE power equipment. Verify the available PoE infrastructure before deployment.
Specifications
| Specification | Details |
|---|
| Brand | Ubiquiti |
| Part Number / MPN | UAP-NANOHD-3-US |
| Product Type | Wireless Access Point 3-Pack |
| Product Family | UniFi nanoHD |
| Regional Version | US |
| WiFi Standard | WiFi 5 / 802.11ac Wave 2 |
| Wireless Bands | 2.4 GHz and 5 GHz |
| Spatial Streams | 6 total |
| 2.4 GHz MIMO | 2x2 |
| 5 GHz MIMO | 4x4 |
| 2.4 GHz Maximum Data Rate | 300 Mbps |
| 5 GHz Maximum Data Rate | 1.7 Gbps |
| 2.4 GHz Antenna Gain | 2.8 dBi |
| 5 GHz Antenna Gain | 3 dBi |
| 2.4 GHz Maximum TX Power | 23 dBm |
| 5 GHz Maximum TX Power | 26 dBm |
| Networking Interface | 1 x Gigabit Ethernet RJ45 |
| Power Method | 802.3af PoE |
| Supported Voltage Range | 44–57 V DC |
| Maximum Power Consumption | 10.5 W per access point |
| Maximum BSSIDs | 8 per radio |
| Mounting | Wall or ceiling |
| Environment | Indoor |
| Dimensions | 160 x 160 x 32.7 mm (6.3 x 6.3 x 1.3 in) |
| Weight | 300 g (10.6 oz) per device; 315 g (11.1 oz) with mount |
| Operating Temperature | -10 to 70 °C (14 to 158 °F) |
| Operating Humidity | 5–95% noncondensing |
| NDAA Compliant | Yes |
| Certifications | CE, FCC, IC, cULus, Anatel |
Frequently Asked Questions
What is included in the UAP-NANOHD-3-US?
The MPN identifies a three-pack of UniFi nanoHD access points. Mounting hardware is provided with each access point. Ubiquiti's documentation specifies that the PoE adapter is included only with the single-pack configuration.
What WiFi standard does the nanoHD support?
The nanoHD supports WiFi 5, based on 802.11ac Wave 2, with backward support for 802.11a/b/g/n.
What are the maximum wireless rates?
The 2.4 GHz radio supports up to 300 Mbps, while the 5 GHz radio supports up to 1.7 Gbps.
How is the nanoHD powered?
The access point supports 802.3af PoE and has a maximum power consumption of 10.5 W. A compatible PoE switch or PoE power source is required for the multi-pack configuration.
Can the nanoHD be mounted on a ceiling or wall?
Yes. The nanoHD supports both wall and ceiling mounting, with mounting hardware supplied.
How many clients can the nanoHD support?
Ubiquiti specifies support for 200+ concurrent clients per access point.
:contentReference[oaicite:0]{index=0}
