Do you have a list of products you are looking to source?
Send us the whole list and get Special discounted prices
The HPEAruba1990-4725, also known as JL484A, is a short-reach SFP28 Transceiver module designed for 25 Gigabit Ethernet over multimode fiber. Operating at 850 nm wavelength with dual LC connectors, it reliably supports communications up to approximately 100 meters over OM4 fiber or ~70 m on OM3. Its compliance with industry standards (IEEE 802.3by, SFF-8402, SFF-8432, SFF-8472) ensures broad interoperability and OEM certification for seamless use in Arubaand compatible HPEplatforms such as the CX series switches. With integrated digital optical monitoring (DOM), administrators can track real-time transmit/receive optical power, temperature, and voltage for proactive network maintenance.
This SFP28 module delivers 25 Gbps line rates using 25GBASE-SR signaling, suitable for high-density data center interconnects, spine-leaf links, and server-to-switch uplinks. It supports backward compatibility, operating at 10 Gbps when needed, making it versatile in mixed-speed LAN environments. The module features a VCSEL-based transmitter and PIN photodiode receiver, delivering optical output power between -6.0 dBm and +2.4 dBm and receiver sensitivity better than -10.3 dBm Designed with a plug-and-play SFP28 form factor, it draws +3.3 V power and supports DOM diagnostics via I2C interface, allowing monitoring of fiber link health metrics. Tested for operation from 0°C to +70°C, it meets RoHS and industry laser safety class 1 standards, ensuring reliability in typical data center environments
The 1990-4725 module is officially supported for ArubaCX and 8325 switch series, making it an OEM-certified component for critical fabric links where 25 GbE bandwidth and low-latency connectivity are required Built with high-quality optical components, the module delivers consistent 25 Gbps throughput with minimal signal degradation over short distances. Its VCSEL-based transmitter ensures efficient optical performance and low jitter, while the receiver's sensitivity supports the typical link budgets required for MMF installations
25 Gb/s SFP28 Transceiver module (25GBASE-SR)
Dual LC duplex interface for multimode fiber
Full DOM support (optical power, temperature, voltage diagnostics)
Max reach up to ~100 meters on OM4 fiber (~70 m on OM3)
Transmitter: VCSEL laser; Receiver: PIN photodiode
Compliance: IEEE 802.3by, SFF-standards, Class 1 Laser safety
e
The integrated DOM (digital optical monitoring) enables continuous diagnostics, providing vital info on power levels and temperature×helping detect fiber attenuation issues or emerging faults before they impact connectivity . The module is engineered for standard temperature operation (0-70 °C) and complies with RoHS and safety standards for industrial reliability Official OEM compatibility with HPEAruba8325 and CX switch platforms ensures seamless firmware support, link validation, and optimal interoperability×minimizing vendor lock-out risks and integration issues Whether used for switch-to-switch uplinks, leaf-spine connections, or server aggregation, this module delivers predictable performance and reliability in modern 25 GbE infrastructures.
25 Gb/s SFP28 transceiver (25GBASE-SR)
LC duplex connector for multimode fiber
DOM interface for live link diagnostics
Approx. 100 m reach on OM4, ~70 m on OM3
Compliant with IEEE and SFF standards
| Specification | Details |
|---|---|
| Model Number | 1990-4725 (JL484A) |
| Module Type | 25 Gb SFP28 LC SR Transceiver module |
| Data Rate | Up to 25 Gbps |
| Connector | LC Duplex |
| Fiber Type | Multimode (MMF) |
| Wavelength | 850 nm |
| Maximum Distance | ~100 m (OM4), ~70 m (OM3) |
| Transmitter Power | -6.0 to +2.4 dBm |
| Receiver Sensitivity | ≤ -10.3 dBm |
| DOM Support | Yes (SFF-8472 via I2C) |
| Power Supply | +3.3V Vcc |
| Operating Temp | 0°C to +70°C |
| Standards Compliance | IEEE 802.3by, SFF-8402/8432/8472, RoHS, Laser Safety |
| Compatible Platforms | Aruba8325 Series, CX Series Switches |

All packages are shipped same day if the order is placed before 3PM CST
We use UPS/FedEx to ship the packages with different service levels offered by UPS/FedEx
Overnight Shipping take 1 business day
Expedited Shipping take about 2-3 business days
Ground shipping take about 3-5 business days
You can select the desired service level at Checkout and we will make sure the package is shipped as per the selected service level.
We Accept
i) PayPal
ii) All Credit & Debit Cards
iii) Purchase Orders
iv) Check
v) Bank Transfer/ACH/Wire Transfer
To process the order through Paypal/CC, you can simply checkout and process the payment.
If you want to issue us Purchase Order/Check/Bank Transfer, Please contact us at the following details
Call: 469.458.9636
Email: sales@dcsupplies.net
If you have any queries, please contact us at the following details and we will be happy to help
Call
469.458.9636
469.458.9638
Email
sales@dcsupplies.net