Ubiquiti UACC-EV-Station-Stand – Dual EV Station Mounting Stand
Overview
The Ubiquiti UACC-EV-Station-Stand is a purpose-built mounting stand for UniFi EV Charging Stations. It provides a stable, permanent platform for deploying up to two EV Stations in a single vertical footprint, suitable for both indoor and outdoor environments [citation:1][citation:3]. The stand is constructed from SUS304 stainless steel and features interior cable routing to maintain a clean, organized installation at commercial properties, fleet facilities, and multi-unit residential locations [citation:1][citation:3].
Construction and Design
The stand is fabricated from SUS304 stainless steel, offering corrosion resistance suitable for outdoor installations and salt-spray environments without additional protective coatings [citation:3]. The compact base footprint measures 208 × 95 mm (8.2 × 3.7 inches) with a height of 1,277 mm (50.3 inches), allowing placement in site-constrained locations where floor space is limited [citation:3][citation:4]. Interior cable routing channels and two base openings accommodate electrical conduit and charging cables, keeping wiring protected and out of sight [citation:1][citation:3].
Compatibility
The stand is designed for Ubiquiti UniFi EV Station equipment. It supports direct mounting of the EV Station Pro (UC-EV-Station-Pro) and the standard EV Station [citation:16][citation:18]. Mounting an EV Station Lite requires the separate EV Station Lite Stand Adapter (UACC-EVSL-Stand-Adapter) [citation:6][citation:16]. The stand accommodates up to two EV Stations on a single unit, enabling dual-charger deployments from one mounting point [citation:1][citation:3].
Key Features
- Mounts up to two Ubiquiti EV Stations on a single vertical stand [citation:1][citation:2]
- SUS304 stainless steel construction for indoor and outdoor durability [citation:3][citation:4]
- Interior cable routing with two base openings for clean cable management [citation:1][citation:5]
- Compact 208 × 95 mm footprint with 1,277 mm height for space-constrained sites [citation:3][citation:4]
- 18 kg (39.7 lb) weight provides stable, permanent mounting without concrete footings in most indoor deployments [citation:3]
Applications
The stand is suited for commercial and fleet EV charging deployments where floor space is limited and multiple charging points are needed from a single location. It supports installations at office complexes, retail parking areas, multi-family residential properties, and fleet depots [citation:11]. The indoor/outdoor rating allows deployment in covered parking structures as well as open-air lots where equipment must withstand weather exposure [citation:3].
DC Supplies Product Note
The UACC-EV-Station-Stand is a mounting accessory only—it does not include EV Stations, charging cables, or electrical components. For EV Station Lite installations, the separate UACC-EVSL-Stand-Adapter is required. Outdoor installations should follow local wind load and anchoring codes; ground-mount fastening or base weighting may be required depending on site conditions [citation:3]. The stand includes mounting anchors, bolts, and a marking template for concrete base installation [citation:11].
Specifications
| Brand | Ubiquiti |
| Part Number / MPN | UACC-EV-Station-Stand |
| Product Type | EV Charger Mounting Stand |
| Compatible Devices | UniFi EV Station, EV Station Pro (EV Station Lite requires UACC-EVSL-Stand-Adapter) [citation:16] |
| Maximum Stations Supported | 2 [citation:1] |
| Enclosure Material | Stainless steel (SUS304) [citation:4] |
| Dimensions | 208 × 95 × 1277 mm (8.2 × 3.7 × 50.3 in) [citation:4] |
| Weight | 18 kg (39.7 lb) [citation:4] |
| Environment Rating | Indoor/Outdoor [citation:3] |
| Mounting Style | Vertical floor stand [citation:3] |
| Cable Routing | Interior routing with 2 base openings [citation:1] |
| Included Accessories | Anchors, bolts, marking template [citation:11] |
| UPC | 810084692233 [citation:18] |
FAQs
Can this stand mount an EV Station Lite?
Yes, but the separate EV Station Lite Stand Adapter (UACC-EVSL-Stand-Adapter) is required for mounting the Lite model. The stand directly supports the EV Station Pro and standard EV Station without additional adapters [citation:6][citation:16].
Does the stand include the EV Stations or charging cables?
No. The UACC-EV-Station-Stand is a mounting accessory only. EV Stations, charging cables, and electrical components are sold separately [citation:2][citation:6].
Can the stand be installed outdoors?
Yes. The stand is rated for indoor and outdoor use. The SUS304 stainless steel construction resists corrosion, though outdoor installations should follow local wind load and anchoring requirements [citation:3].
How many EV Stations can be mounted on one stand?
Up to two EV Stations can be mounted on a single UACC-EV-Station-Stand [citation:1][citation:3].
What installation hardware is included?
The stand includes anchors, bolts, and a marking template for concrete base installation [citation:11].
