Eaton BC850R - 850 VA Standby UPS 120 V

Overview

The Eaton BC850R is a standby uninterruptible power supply (UPS) intended to provide basic battery backup and surge protection for 120 V single-phase IT and electronic equipment. It is commonly deployed by network administrators and facilities technicians in small offices, retail point-of-sale areas, and home/desktop environments where utility power continuity is needed for short interruptions or controlled shutdowns. This model protects devices against blackouts, brownouts, overvoltages, surges, and line noise without advanced voltage regulation features.

Rated at 850 VA / 450 W, the BC850R supports moderate loads such as desktop PCs, small servers, network devices, and peripherals. The unit operates in standby topology, switching to battery only when input voltage exceeds predetermined thresholds (high or low), and reverts to mains when utility power stabilizes. Transfer to battery power occurs typically in under 6 ms.

Deployment is typically desktop or wall mountable, placing the UPS near protected equipment in wiring closets, branch office cubicles, or retail terminals. The compact form factor is not designed for direct 19-inch rack mounting, so it is most suitable where space and simple backup capability are prioritized.

Connectivity is minimal by design: there is no communications interface (USB, serial, or network), and status is indicated via onboard LEDs and alarm indicators. This limits remote monitoring or integration with automated shutdown software. The internal replaceable battery is accessed through a base panel, enabling field service without complete unit replacement.

A practical deployment example is protecting a small network router, switch, and workstation in a branch closet. During brief power loss, the BC850R sustains critical loads long enough for a controlled shutdown or to bridge to standby generation. For environments needing extended runtime or detailed monitoring, larger UPS models with AVR or network management support are recommended.

This unit is not suitable for data center core racks or high-availability systems where precise voltage regulation, network management, or extended battery runtime is required. Units with line-interactive topology or modular battery expandability better serve those use cases.

Key Features

• 850 VA / 450 W standby UPS for 120 V AC loads
• Protects against outages, brownouts, surges, and noise
• (5) NEMA 5-15R battery/surge outlets
• <6 ms transfer to battery backup
• Replaceable internal battery access panel

Specifications