APC SRT3000RMXLA-NC 3000 VA On-Line UPS 120 V
Overview :
The APC SRT3000RMXLA-NC is a double-conversion on-line uninterruptible power supply (UPS) that delivers continuous, conditioned AC power without transfer delays. It is deployed by infrastructure and data centre engineers to protect servers, storage systems, network switches, VoIP/UC equipment, and other critical devices against sags, surges, frequency fluctuations, and total utility failures in 120 V single-phase environments.
Rated at 3000 VA / 2700 W, this UPS uses true double-conversion topology with a pure sine-wave output to isolate connected loads from grid anomalies, ensuring predictable power quality even when utility voltage and frequency vary. The internal bypass enables continued load support should internal UPS maintenance or faults occur.
Mechanically, the unit is a 19″ 2U rackmount with tower conversion option, making it suitable for server racks, IDF/MDF cabinets, and edge compute enclosures. Rails and mounting hardware are included for immediate rack deployment.
Connectivity includes eight NEMA 5-20R and one NEMA L5-30R output receptacles and a pre-installed network management card (AP9631) with environmental monitoring for remote monitoring and integration into power management platforms like APC EcoStruxure IT or third-party SNMP systems. Communications also include USB, serial, and EPO support.
Typical internal runtime is approximately 3 minutes at full load and ~10-11 minutes at half load, providing enough backup for orderly shutdowns or transitions to standby generators. Runtime can be extended with external battery packs (SRT96RMBP series) for longer outages.
This UPS is not suitable for 208 V/230 V distribution without the corresponding regional variant or for environments requiring continuous full-runtime power without scalable battery expansion
Key Features
• 3000 VA / 2700 W double-conversion on-line UPS
• Pure sine-wave output for sensitive electronics
• Pre-installed network management card (AP9631)
• 2U rack/tower convertible form factor
• Scalable runtime with external battery packs
Specifications
| Parameter | Specification |
|---|
| Brand | APC by Schneider Electric |
| Part Number | SRT3000RMXLA-NC |
| Product Type | On-line UPS (Double-Conversion) |
| Power Capacity | 3000 VA / 2700 W |
| Topology | Double-conversion on-line |
| Nominal Input Voltage | 120 V AC |
| Nominal Output Voltage | 120 V AC |
| Input Connector | NEMA L5-30P |
| Output Connectors | 8× NEMA 5-20R, 1× NEMA L5-30R |
| Output Waveform | Pure sine wave |
| Frequency | 50/60 Hz auto-sensing |
| Communications | Pre-installed NIC, USB, Serial, EPO |
| Battery Type | Sealed lead-acid |
| Runtime | ~3 min full load / ~10-11 min half load |
| Recharge Time | ~3 hours |
| Dimensions (HxWxD) | 3.35″ × 17.0″ × 25.0″ (85 × 432 × 635 mm) |
| Weight | ~69 lb (31.3 kg) |
| Rack Height | 2 U |
| Certifications | ENERGY STAR V2.0, UL, CSA, RoHS |
