Overview
The G.SKILL F5-6000J3040G32GX2-TZ5NR is a 64GB Trident Z5 Neo RGB desktop memory kit consisting of two 32GB DDR5 modules. The kit is rated for up to DDR5-6000 data rates with 30-40-40-96 timings at 1.40V and supports both AMD EXPO and Intel XMP 3.0 memory profiles.
Memory Performance
The kit provides a tested speed of DDR5-6000 and a CAS latency of CL30. At default BIOS settings, compatible systems operate using the module's standard SPD configuration. Reaching the rated DDR5-6000 profile requires a compatible motherboard and processor and activation of the appropriate memory profile in BIOS.
Compatibility and Configuration
The F5-6000J3040G32GX2-TZ5NR uses a 288-pin DIMM form factor and is designed for desktop systems. G.SKILL identifies the Trident Z5 Neo RGB series for DDR5-enabled AMD platforms and provides both AMD EXPO and Intel XMP 3.0 profiles on this model. Actual operating speed and stability depend on the capabilities of the installed motherboard and processor.
RGB Lighting
The Trident Z5 Neo RGB modules incorporate a programmable RGB light bar. Lighting can be controlled through G.SKILL Trident Z Lighting Control software or compatible motherboard lighting platforms, including ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light and ASRock Polychrome Sync, subject to motherboard support.
Key Features
- 64GB total capacity configured as 2 x 32GB modules.
- DDR5-6000 rated data rate with CL30 30-40-40-96 timings.
- AMD EXPO and Intel XMP 3.0 memory overclocking profiles.
- 288-pin desktop DIMM design with unbuffered, non-ECC memory.
- Customizable RGB lighting with supported G.SKILL and motherboard lighting software.
Applications
This matched 64GB kit is intended for compatible desktop PCs where higher DDR5 memory capacity and a 6000 MT/s performance profile are required. It is suited to systems using compatible AMD or Intel desktop platforms that support DDR5 UDIMM memory and the relevant memory profiles.
DC Supplies Product Note
The DDR5-6000 rating is a memory overclocking profile rather than the default JEDEC operating condition. Before deployment, verify the exact motherboard and processor combination against G.SKILL's memory compatibility resources. G.SKILL also recommends not mixing separate memory kits because doing so can cause stability or compatibility problems.
Specifications
| Specification | Details |
|---|
| Brand | G.SKILL |
| Part Number / MPN | F5-6000J3040G32GX2-TZ5NR |
| Product Type | Desktop DDR5 Memory Kit |
| Series | Trident Z5 Neo RGB |
| Total Capacity | 64GB |
| Kit Configuration | 2 x 32GB |
| Memory Type | DDR5 |
| Memory Speed | 6000 MT/s |
| CAS Latency | CL30 |
| Tested Timings | 30-40-40-96 |
| Tested Voltage | 1.40V |
| Default SPD Speed | 4800 MT/s |
| Default SPD Voltage | 1.10V |
| Form Factor | 288-pin DIMM |
| Memory Configuration | Dual-channel kit |
| ECC | Non-ECC |
| Registered | Unbuffered |
| AMD EXPO | Supported |
| Intel XMP | Intel XMP 3.0 supported |
| RGB Lighting | Customizable RGB |
| Heat Spreader | Yes |
| Warranty | Limited Lifetime |
Frequently Asked Questions
What is the capacity of the F5-6000J3040G32GX2-TZ5NR?
The kit provides 64GB of total memory using two 32GB DDR5 modules.
What speed is this G.SKILL memory rated for?
The kit is rated for up to DDR5-6000, with tested timings of 30-40-40-96 at 1.40V.
Does this memory support AMD EXPO?
Yes. The F5-6000J3040G32GX2-TZ5NR includes an AMD EXPO profile for compatible systems.
Does this kit support Intel XMP?
Yes. G.SKILL lists Intel XMP 3.0 support in addition to AMD EXPO.
Will the memory automatically run at DDR5-6000?
No. G.SKILL states that the memory boots at the SPD speed under default BIOS settings. The rated overclocked speed requires compatible hardware and the appropriate BIOS memory profile.
Can this kit be mixed with another memory kit?
G.SKILL recommends not mixing memory kits because combining separate kits can result in stability or system compatibility problems.
