The Kingston FURY Beast KF560C36BBE2K2-32 is a 32GB desktop memory kit consisting of two 16GB DDR5 modules. Designed for compatible desktop systems, it offers a rated data transfer speed of 6000MT/s with CL36 timings. Its black heat spreaders provide a clean design for gaming and productivity PCs, while AMD EXPO and Intel XMP 3.0 support allows compatible systems to configure the memory's rated performance profile.
DDR5 Performance and Memory Profiles
This kit is tested for DDR5-6000 operation with primary timings of 36-44-44 at 1.35V. Its standard JEDEC profile operates at DDR5-4800 with timings of 40-39-39 at 1.1V. Alternative EXPO and XMP profiles support DDR5-5600 with timings of 40-40-40 at 1.25V. Actual operating speed depends on the processor, motherboard, BIOS, and selected memory settings.
Compatibility and Installation
The kit uses 288-pin DDR5 unbuffered DIMMs designed for compatible desktop motherboards. It is not intended for laptops requiring SO-DIMM modules or systems that support DDR4 memory only. Check the motherboard and processor specifications before installation to confirm supported memory capacity and speeds. Enabling a supported EXPO or XMP profile in BIOS may be required to achieve the rated DDR5-6000 speed.
Key Features
- 32GB total capacity supplied as two matched 16GB DDR5 modules.
- DDR5-6000 rated data rate with CL36-44-44 timings at 1.35V.
- Supports AMD EXPO v1.1 and Intel XMP 3.0 memory profiles.
- Black heat spreaders with a module height of 34.9mm.
- Non-ECC, unbuffered desktop memory with on-die ECC technology.
Suitable Applications
This memory kit is suitable for compatible desktop computers used for gaming, multitasking, content creation, and everyday productivity. Actual performance depends on the processor, motherboard, software, and overall system configuration.
DC Supplies Product Note
Confirm the exact part number and motherboard compatibility before ordering. The rated DDR5-6000 speed may require enabling a supported EXPO or XMP profile in BIOS. This product is a matched two-module kit; check the manufacturer's guidance before separating the modules.
Specifications
| Brand | Kingston |
|---|
| Part Number / MPN | KF560C36BBE2K2-32 |
|---|
| Product Type | Desktop DDR5 memory kit |
|---|
| Product Line | Kingston FURY Beast |
|---|
| Total Capacity | 32GB |
|---|
| Kit Configuration | 2 × 16GB |
|---|
| Memory Technology | DDR5 SDRAM |
|---|
| Rated Data Rate | 6000MT/s |
|---|
| Rated Timings | CL36-44-44 |
|---|
| Rated Profile Voltage | 1.35V at DDR5-6000 |
|---|
| Form Factor | 288-pin DIMM |
|---|
| Module Organization | 1Rx8 per module |
|---|
| Memory Type | Non-ECC, unbuffered DIMM |
|---|
| Error Correction | On-die ECC |
|---|
| Memory Profiles | AMD EXPO v1.1, Intel XMP 3.0 |
|---|
| JEDEC Default Profile | DDR5-4800, CL40-39-39, 1.1V |
|---|
| Alternative Profile | DDR5-5600, CL40-40-40, 1.25V |
|---|
| Heat Spreader Colour | Black |
|---|
| Module Height | 34.9mm |
|---|
| Operating Temperature | 0°C to +85°C |
|---|
| Storage Temperature | -55°C to +100°C |
|---|
Frequently Asked Questions
How much memory does this kit provide?
The kit provides 32GB of total memory, supplied as two 16GB DDR5 modules.
What is the rated memory speed?
The rated data rate is 6000MT/s with CL36-44-44 timings at 1.35V when the supported performance profile is enabled.
Does this kit support AMD EXPO and Intel XMP?
Yes. It supports AMD EXPO v1.1 and Intel XMP 3.0. Profile availability depends on motherboard, processor, and BIOS support.
Can this memory be installed in a laptop?
No. This kit uses 288-pin desktop DIMMs rather than the SO-DIMM modules commonly required by laptops.
Is this registered ECC memory?
No. It is non-ECC, unbuffered desktop memory. On-die ECC is a DDR5 chip-level feature and is not equivalent to system-level ECC memory.
Will it run at 6000MT/s automatically?
Not necessarily. The system may initially use the default JEDEC memory settings. Reaching the rated DDR5-6000 speed may require enabling a supported EXPO or XMP profile in BIOS.
