The Kingston FURY Renegade KF560C32RSK2-96 is a high-capacity desktop memory kit featuring 96GB of DDR5 memory across two 48GB modules. Designed for compatible desktop systems, it delivers a rated data transfer speed of 6000MT/s with CL32 timings. The silver-and-black heat spreader design complements performance-oriented PC builds, while Intel XMP 3.0 support enables supported systems to configure the memory's rated performance profile.
DDR5-6000 Performance
This kit is tested for DDR5-6000 operation with primary timings of 32-38-38 at 1.35V. Its standard JEDEC profile runs at DDR5-4800 with timings of 40-39-39 at 1.1V. Additional XMP profiles support DDR5-5600 at 40-40-40 and DDR5-4800 at 38-38-38. Actual operating speed depends on the processor, motherboard, BIOS, and selected memory settings.
Intel XMP 3.0 Support
The memory supports Intel Extreme Memory Profiles (XMP) 3.0, allowing compatible systems to apply predefined performance settings through the BIOS. Before enabling an XMP profile, check your motherboard and processor specifications to confirm supported memory speeds and configurations. The rated DDR5-6000 data rate is not guaranteed on every system.
Compatibility and Installation
The kit uses 288-pin DDR5 unbuffered DIMMs for compatible desktop motherboards. It is not designed for laptops requiring SO-DIMM memory or motherboards that support DDR4 only. Its 96GB capacity is supplied as a matched pair of 48GB modules. Confirm motherboard compatibility and supported memory capacity before installation.
Key Features
- 96GB total capacity supplied as two 48GB DDR5 modules.
- DDR5-6000 rated data rate with CL32-38-38 timings at 1.35V.
- Intel XMP 3.0 support for compatible systems.
- Silver-and-black heat spreaders with a module height of 39.2mm.
- Non-ECC, unbuffered desktop memory with on-die ECC technology.
Suitable Applications
This high-capacity memory kit is suitable for compatible desktop systems used for demanding multitasking, content creation, gaming, and memory-intensive productivity workloads. Actual application performance depends on the complete hardware configuration, software, and memory settings.
DC Supplies Product Note
Check the exact part number and motherboard compatibility before ordering. The rated DDR5-6000 speed may require enabling the supported Intel XMP profile in BIOS. This is a matched kit of two modules; consult the manufacturer's guidance regarding use and warranty conditions if the modules are separated.
Specifications
| Brand | Kingston |
|---|
| Part Number / MPN | KF560C32RSK2-96 |
|---|
| Product Type | Desktop DDR5 memory kit |
|---|
| Product Line | Kingston FURY Renegade |
|---|
| Total Capacity | 96GB |
|---|
| Kit Configuration | 2 × 48GB |
|---|
| Memory Technology | DDR5 SDRAM |
|---|
| Rated Data Rate | 6000MT/s |
|---|
| Rated Timings | CL32-38-38 |
|---|
| Rated Profile Voltage | 1.35V at DDR5-6000 |
|---|
| Form Factor | 288-pin DIMM |
|---|
| Module Organization | 2Rx8 per module |
|---|
| Memory Type | Non-ECC, unbuffered DIMM |
|---|
| Error Correction | On-die ECC |
|---|
| Memory Profile | Intel XMP 3.0 |
|---|
| JEDEC Default Profile | DDR5-4800, CL40-39-39, 1.1V |
|---|
| Alternative XMP Profile | DDR5-5600, CL40-40-40, 1.25V |
|---|
| Additional XMP Profile | DDR5-4800, CL38-38-38, 1.1V |
|---|
| Heat Spreader Colour | Silver and black |
|---|
| Module Height | 39.2mm |
|---|
| Operating Temperature | 0°C to +85°C |
|---|
| Storage Temperature | -55°C to +100°C |
|---|
Frequently Asked Questions
How much memory does this kit provide?
It provides 96GB of total capacity through two 48GB DDR5 modules.
What is the rated memory speed?
The rated data rate is 6000MT/s with CL32-38-38 timings at 1.35V when the supported XMP profile is enabled.
Does this memory support Intel XMP?
Yes. The kit supports Intel XMP 3.0. Profile availability and achievable memory speed depend on the motherboard, processor, and BIOS.
Can I use this kit in a laptop?
No. This kit uses 288-pin desktop DIMMs, not the SO-DIMM modules commonly required by laptops.
Is this registered ECC memory?
No. It is non-ECC, unbuffered desktop memory. On-die ECC is a DDR5 chip-level feature and is not equivalent to system-level ECC memory.
Will it operate at 6000MT/s automatically?
Not necessarily. The default memory setting may use a lower JEDEC speed. Reaching the rated DDR5-6000 profile may require enabling XMP in BIOS, provided the system supports that configuration.
