The Kingston KCP556US8-16 is a 16GB DDR5 memory module designed for compatible desktop computers. With a rated data transfer speed of 5600MT/s, this memory module provides additional capacity for everyday computing, multitasking, and productivity applications.
Featuring a 288-pin DIMM form factor, CL46 latency, and a 1.1V operating voltage, the KCP556US8-16 is designed for systems that support DDR5 desktop memory. Its non-ECC, unbuffered architecture makes it suitable for compatible desktop configurations that require this memory type.
Key Features
- 16GB memory capacity: Adds RAM capacity to compatible desktop computers.
- DDR5 technology: Designed for systems equipped with compatible DDR5 memory slots.
- 5600MT/s data transfer rate: Supports a rated speed of 5600MT/s, subject to system capabilities.
- 288-pin DIMM form factor: Designed for compatible desktop memory slots.
- Efficient operating specifications: Features CL46 latency, 1.1V operation, single-rank 1Rx8 configuration, and a non-ECC unbuffered design.
Performance and Compatibility
The Kingston KCP556US8-16 is intended for desktop computers that support 16GB DDR5 DIMM memory modules. Actual operating speed depends on the processor, motherboard, BIOS, and supported memory configuration. Systems with lower supported memory speeds may operate the module below its rated 5600MT/s data rate.
Before purchasing, verify your computer or motherboard specifications for DDR5 support, module capacity, and memory speed. This is a desktop DIMM module and is not interchangeable with laptop SO-DIMM memory or DDR4 modules.
Technical Specifications
| Brand | Kingston |
|---|
| Manufacturer Part Number | KCP556US8-16 |
|---|
| Product Type | Desktop RAM module |
|---|
| Memory Capacity | 16GB |
|---|
| Memory Technology | DDR5 SDRAM |
|---|
| Rated Data Transfer Rate | 5600MT/s |
|---|
| Memory Standard | DDR5-5600 / PC5-44800 |
|---|
| Form Factor | DIMM |
|---|
| Pin Count | 288-pin |
|---|
| CAS Latency | CL46 |
|---|
| Operating Voltage | 1.1V |
|---|
| ECC Support | Non-ECC |
|---|
| Memory Buffering | Unbuffered |
|---|
| Rank Configuration | Single-rank (1Rx8) |
|---|
| Module Configuration | 1 x 16GB |
|---|
| EAN | 0740617334357 |
|---|
| Warranty | Limited lifetime warranty, subject to manufacturer's terms |
|---|
Frequently Asked Questions
1. What is the capacity of the Kingston KCP556US8-16?
This memory module provides 16GB of DDR5 RAM in a single module.
2. What is the rated speed of this memory?
The rated data transfer rate is 5600MT/s. The actual operating speed depends on the capabilities and configuration of the computer.
3. Is this memory compatible with laptops?
This model uses a 288-pin desktop DIMM form factor. Most laptops require SO-DIMM memory, so check your device specifications before purchasing.
4. Can this module be installed in a DDR4 motherboard?
No. The KCP556US8-16 is DDR5 memory and requires a compatible DDR5 memory slot. DDR4 and DDR5 modules are not interchangeable.
5. Does this module support ECC?
No. This model is specified as non-ECC and unbuffered. Verify that these specifications meet your computer's memory requirements.
6. Will this module always run at 5600MT/s?
Not necessarily. The processor, motherboard, BIOS, and memory configuration determine the actual operating speed. The module may run at a lower speed supported by the system.
Product Summary
The Kingston KCP556US8-16 is a 16GB DDR5 5600MT/s desktop memory module featuring a 288-pin DIMM form factor, CL46 latency, 1.1V operation, and a non-ECC unbuffered design. Confirm compatibility with your computer before installation to ensure the correct memory type and supported operating speed.
