Overview
The Ubiquiti UISP-P-PRO UISP Power Pro is an uninterruptible power management system designed for high-capacity WISP deployment sites. It provides multiple 27V DC Power TransPort outputs, dual AC power inputs, an optional lead-acid battery backup input, and network-based management through UISP.
Power Architecture
UISP Power Pro provides three Power TransPort ports, with up to 250W at 27V DC available per port. Total output is rated at 240W with one installed PSU or 480W with two installed PSUs. The system includes one AC/DC PSU, while an additional PSU can be installed separately for increased power capacity.
Backup Power
A dedicated 24V DC battery input supports a lead-acid battery rated up to 20.83A. The battery is not included. Ubiquiti specifies that the backup input is intended for lead-acid batteries only.
Management and Connectivity
The system includes a 10/100 MbE RJ45 management interface with Ethernet in-band management and Bluetooth connectivity. A 1.3-inch touchscreen provides local system information and status monitoring. UISP version 1.4.8 or later is required for management.
Key Features
- Three 27V DC Power TransPort outputs
- Up to 480W total output with two installed PSUs
- Dual 100–240V AC primary power inputs
- 24V DC lead-acid battery backup input
- 1.3-inch touchscreen with Ethernet and Bluetooth management
Deployment Applications
UISP Power Pro is intended for WISP infrastructure where multiple compatible UISP devices require centralized DC power and continuity during AC power interruptions. The Power TransPort architecture can simplify power distribution at wireless network sites while providing optional PSU redundancy and battery backup.
DC Supplies Product Note
For system planning, verify the required DC load before selecting the PSU configuration. Ubiquiti specifies 240W total output with one PSU and 480W with two PSUs. The optional battery backup requires a compatible 24V lead-acid battery, which is not included with the UISP-P-PRO.
Specifications
| Brand | Ubiquiti |
|---|
| Part Number / MPN | UISP-P-PRO |
|---|
| Product Type | Uninterruptible Power Management System |
|---|
| Primary Power | 2 × Universal AC inputs |
|---|
| AC Input Voltage | 100–240V AC |
|---|
| AC Input Frequency | 50/60Hz |
|---|
| AC Input Current | 3.5A maximum |
|---|
| Power TransPort Interfaces | 3 |
|---|
| Power TransPort Output | Up to 250W, 27V DC per port |
|---|
| Total Output with 1 PSU | 240W at 27V DC |
|---|
| Total Output with 2 PSUs | 480W at 27V DC |
|---|
| Included PSU | 1 |
|---|
| Additional PSU | Supported; sold separately |
|---|
| Backup Power Input | 24V DC, 20.83A lead-acid battery input |
|---|
| Battery Included | No |
|---|
| Networking Interface | 1 × 10/100 MbE RJ45 |
|---|
| Management | Ethernet In-Band, Bluetooth, UISP |
|---|
| Display | 1.3-inch touchscreen |
|---|
| Maximum Power Consumption | 3W, excluding Power TransPort output and battery charger |
|---|
| Enclosure Material | SGCC steel, polycarbonate/ABS |
|---|
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
|---|
| Operating Humidity | 5–95% non-condensing |
|---|
| Management Software | UISP version 1.4.8 or later |
|---|
| ESD/EMP Protection | Air: ±15kV; Contact: ±8kV |
|---|
| Certifications | CE, FCC, IC, PTCRB, AT&T |
|---|
FAQs
What is the Ubiquiti UISP-P-PRO used for?
It is an uninterruptible power management system designed to provide centralized DC power and backup power capabilities for high-capacity WISP deployment sites.
How many Power TransPort outputs does it have?
The UISP-P-PRO has three Power TransPort ports, each supporting up to 250W at 27V DC.
What is the total output capacity?
Ubiquiti specifies 240W total output with one PSU and 480W with two PSUs.
Does the UISP-P-PRO include a battery?
No. The system provides a 24V DC lead-acid battery input, but the battery is not included.
Can a second power supply be installed?
Yes. One PSU is included, and an additional compatible PSU can be installed separately to increase the system's total output capacity.
