Overview
The APC SYPM10KF2 is a 10kW high-efficiency power module manufactured by APC by Schneider Electric. Designed for compatible Symmetra PX 20kW, 40kW, and 100kW UPS systems, this module can be used as a replacement power module or to increase the available power capacity of a supported UPS configuration.
Operating with a nominal input and output voltage of 208V three-phase, the SYPM10KF2 delivers a rated power capacity of 10,000 VA and 10,000 watts. Its online double-conversion topology and sine-wave output are designed to support critical equipment that requires consistent, conditioned electrical power.
The module features a black finish and is designed for installation in compatible Symmetra PX UPS equipment. System compatibility, available module positions, electrical requirements, and the total supported capacity should be verified before installation.
Key Features
- APC Symmetra PX 10kW power module
- Manufacturer part number: SYPM10KF2
- High-efficiency power module design
- Rated power capacity of 10kW / 10kVA
- 208V three-phase input and output
- Online double-conversion topology
- Sine-wave output
- Designed for compatible Symmetra PX 20/40/100 UPS systems
- Suitable for replacement or supported capacity expansion
- Black finish
Technical Specifications
| Brand | APC |
|---|---|
| Manufacturer | Schneider Electric |
| Model | SYPM10KF2 |
| Product Type | UPS Power Module |
| Product Series | Symmetra PX |
| Rated Power | 10,000 W / 10kW |
| Rated Capacity | 10,000 VA / 10kVA |
| Nominal Input Voltage | 208V AC, three-phase |
| Nominal Output Voltage | 208V AC, three-phase |
| Input Frequency | 60Hz ± 3Hz |
| Power Factor at Full Load | 0.99 |
| Topology | Online Double Conversion |
| Output Waveform | Sine Wave |
| Harmonic Distortion | Less than 5% at full load |
| Color | Black |
| Compatible UPS Systems | Symmetra PX 20/40/100 |
| Included Equipment | Installation guide |
| Height | 5.20 inches (13.2 cm) |
| Width | 19.02 inches (48.3 cm) |
| Depth | 27.56 inches (70 cm) |
| Net Weight | 55.23 lbs (25.05 kg) |
Applications
The APC SYPM10KF2 is intended for compatible UPS installations in data centres, server rooms, enterprise networks, telecommunications environments, and other facilities that depend on critical power protection. It can serve as a replacement module or support an increase in UPS capacity when permitted by the installed system configuration.
Compatibility and Installation
Before purchasing, confirm that the SYPM10KF2 is supported by the exact Symmetra PX UPS model and configuration. Check the available module slots, system capacity limits, and electrical requirements. Installation should follow Schneider Electric's documentation and be performed by qualified personnel.
What's Included
The manufacturer's listed supplied equipment includes an installation guide. Confirm the condition of the power module and the exact contents of the item offered by the seller before ordering. The module is a component of a compatible UPS system and is not a complete standalone UPS.
Frequently Asked Questions
What is the APC SYPM10KF2?
It is a 10kW high-efficiency power module for compatible APC Symmetra PX UPS systems.
Which UPS systems support this module?
The module is specified for compatible Symmetra PX 20kW, 40kW, and 100kW UPS systems. Verify the exact model and configuration before installation.
What is its rated power capacity?
The SYPM10KF2 is rated at 10,000 watts and 10,000 VA.
What voltage does it use?
It is designed for nominal 208V three-phase input and output.
Can it operate independently?
No. It is a power module intended for installation in a compatible Symmetra PX UPS system.
Important Information
Always verify model compatibility, electrical requirements, module configuration, and installation instructions before purchase or use. Actual system performance depends on the complete UPS configuration and operating conditions.










