Detailed Specifications
EXTREME NETWORKS 5601313-U1 - Power Cord
Overview
The EXTREME NETWORKS 5601313-U1 is an enterprise-grade, standard-duty AC utility power infrastructure cable engineered to sustain continuous electrical paths between localized regional distribution outlets and host hardware transformers. This certified power delivery accessory resolves system operational deficits by providing a heavy-gauge, manufacturer-validated structural loop that replaces broken or non-standard legacy equipment line cords. It establishes immediate power readiness across commercial campus networking nodes, remote data storage frames, and edge communication hubs.
The physical architecture combines a standard NEMA 5-15P raw-source plug on the primary endpoint with an international IEC 60320 C13 hardware connector interface on the terminal endpoint. Fabricated with thick 16 AWG solid copper internal conductors, the cable assembly safely accommodates a continuous electrical current draw of up to 13 amperes at a nominal operational range of 125 volts AC. The ruggedized thermoplastic jacket delivers reliable insulation defense, preventing line signal bleeding and minimizing the operational breakdown hazards caused by typical data-closet friction or sharp rack geometric paths.
Tailored for direct deployment inside structured corporate server racks and localized intermediate distribution frames (IDFs), this cable bridges enterprise switches, access control routers, and core chassis nodes directly to localized standard 120V wall outlets or basic power distribution units (PDUs). It functions as the native, factory-included North American AC input cable for mid-tier legacy switches and specialized multi-input modular assemblies like the Extreme 1600W/1200W core transformer platforms. Avoid deploying this low-voltage hardware cord in specialized high-amperage 240V utility loops requiring NEMA 6-15P plug layouts, or within high-temperature blade frameworks running dedicated IEC C16 high-heat terminal receptacles.
Key Features
16 AWG solid copper conductors prevent high-amperage internal heat fatigue.
Standard NEMA 5-15P plug links cleanly into common North American outlets.
Molded IEC C13 straight interface locks directly onto standard hardware bays.
13-Ampere continuous current capacity sustains heavy edge-switch loads.
Factory-validated engineering eliminates the arc risks of generic power lines.
Specifications
| Spec Parameter | Technical Data |
| Brand | EXTREME NETWORKS |
| Part Number | 5601313-U1 |
| Product Type | Power Cord |
| Cable Jacket Category | Standard-Duty Thermoplastic Appliance Line |
| First End Connector | 1 x 3-Prong Grounded NEMA 5-15P (Male Plug) |
| Second End Connector | 1 x 3-Conductor IEC 60320 C13 (Female Receptacle) |
| Maximum Amperage | 13 Amperes Continuous Current Allocation |
| Nominal Voltage | 125 Volts AC Operational Current Line |
| Internal Wire Gauge | 16 AWG (American Wire Gauge) Pure Copper |
| Conductor Count | 3 Conductors (Line, Neutral, Ground) |
| Regional Target | North America / United States / Canada Standard |
| Chassis Target Systems | Extreme Universal Switching Elements & Core Chassis Power Modules |
| Safety Compliance | UL Listed, RoHS Certified, CSA Standard Compliant |
