HPE R6P67A Aruba AP-PoE-Atsr 1P SR 802.3AT 30W PoE Injector

HPE R6P67A – 1‑Port Smart Rate 802.3at 30 W Midspan Injector

Overview

The HPE R6P67A is a single‑port PoE+ (IEEE 802.3at) midspan injector designed to deliver both data and power over one Ethernet cable to a powered device, such as a wireless access point or IP camera. It removes the need to run a separate AC power line to the device, simplifying deployment in any network environment. In practice you’d use it in a branch office, campus edge or retrofit scenario where non‑PoE switches are present and you need to power one device reliably. It supports Gigabit data (10/100/1000 Mbps) along with up to 30 W of power output, making it suitable for higher‑power devices like WiFi 6 access points or PTZ cameras. It integrates seamlessly into a network alongside PoE switches or midspans and follows Aruba/HPE’s Smart Rate midspan design guidelines.

Key Features

• Single‑port injector delivering up to 30 W of PoE+ power under IEEE 802.3at standard — sufficient to power many enterprise access points and devices.

• Smart‑Rate capability ensures full Gigabit link (10/100/1000 Mbps) on the data path, so the powered device gets full bandwidth while also being powered.

• Simple plug‑in design: connects between standard switch and powered device, ideal for retrofits or point of power where the switch lacks PoE.

• Broad compatibility with Aruba/HPE access points and other PoE+ devices following standard 802.3at; supports indoor use in wiring closets or near ceiling access point installations.

• Compact form‑factor, no additional network configuration required—just insert into line, connect device, power and go.

Technical Specifications