Overview
The Ubiquiti POE-24-12W-WH is a 24VDC, 12W PoE injector designed to provide power and network connectivity to compatible Ubiquiti devices over Ethernet. It accepts 100–240VAC input and provides 24VDC at 0.5A output.
Power and Connectivity
The injector provides 12W of total output power through 2-pair PoE using pins 4, 5 for positive and pins 7, 8 for negative. It features a Gigabit Ethernet port, shielded RJ45 data input/PoE connection, and an IEC-320 C6 AC connector.
Protection and Management
The POE-24-12W-WH includes surge and clamping protection, remote reset capability, and a physical reset button. Ubiquiti specifies up to 1500A maximum surge discharge on the power side and 36A peak pulse current on the data side.
Key Features
- 24VDC output at 0.5A for 12W total power
- Gigabit Ethernet connectivity
- 2-pair PoE power delivery
- Remote reset capability and physical reset button
- Surge and clamping protection for connected equipment
Applications
- Powering compatible Ubiquiti network devices
- Single-device PoE deployment where 24V passive PoE is required
- Network installations without an available PoE switch port
- Outdoor network equipment installations requiring PoE protection
DC Supplies Product Note
The POE-24-12W-WH provides 24V passive PoE rather than IEEE-standard PoE negotiation, so the connected device should specifically support the required 24V power input before installation.
Specifications
| Brand | Ubiquiti |
|---|
| Part Number / MPN | POE-24-12W-WH |
|---|
| Product Type | PoE Injector |
|---|
| Output Voltage | 24VDC |
|---|
| Output Current | 0.5A |
|---|
| Total Output Power | 12W |
|---|
| Input Voltage | 100–240VAC |
|---|
| Input Frequency | 50/60Hz |
|---|
| Networking Interface | Gigabit Ethernet RJ45 |
|---|
| PoE Powering | 2-pair |
|---|
| Power Pins | Pins 4, 5 (+); Pins 7, 8 (-) |
|---|
| AC Connector | IEC-320 C6 |
|---|
| Data In / PoE | Shielded RJ45 socket |
|---|
| Remote Reset | Yes |
|---|
| Reset Button | Yes |
|---|
| Surge Protection | Difference and common mode |
|---|
| Maximum Surge Discharge | 1500A (8/20 μs) power |
|---|
| Peak Pulse Current | 36A (10/1000 μs) data |
|---|
| Efficiency | 75%+ |
|---|
| Operating Temperature | 0 to 40 °C (32 to 104 °F) |
|---|
| Storage Temperature | -30 to 70 °C (-22 to 158 °F) |
|---|
| Operating Humidity | 35–95% non-condensing |
|---|
| Certifications | CE, FCC, IC, UL |
|---|
| NDAA Compliant | Yes |
|---|
FAQs
What is the output of the POE-24-12W-WH?
It provides 24VDC at 0.5A, for a total rated output of 12W.
Does the POE-24-12W-WH support Gigabit Ethernet?
Yes. The current Ubiquiti specification lists a Gigabit LAN port.
Does this injector use standard IEEE PoE?
The POE-24-12W-WH uses 24V passive PoE with 2-pair power delivery. Verify that the connected device supports the required 24V passive PoE input.
What input voltage does it accept?
The injector accepts 100–240VAC at 50/60Hz.
Does it have surge protection?
Yes. It provides difference-mode and common-mode surge protection, along with clamping protection for the data and power circuits.
