Close
Cisco SMARTnet Authorized Reseller
150
AXIS 02944-001 P4708-PLVE 2 8MP Panoramic Network Camera View larger

AXIS 02944-001 P4708-PLVE 2 8MP Panoramic Network Camera

02944-001

New

Dual-sensor outdoor panoramic network camera featuring two 8MP sensors,

×
   
 


Detailed Specifications

Overview

The AXIS 02944-001 P4708-PLVE is a multidirectional panoramic network camera designed for outdoor video surveillance. It combines two independently adjustable 8MP camera heads in a single device, providing coverage of different viewing directions through one network connection and IP address.

Part of the AXIS P47 Series, the camera features varifocal lenses, remote zoom and focus capabilities, and AI-based video analytics. Its dual-sensor architecture allows installers to configure each camera head according to the monitoring requirements of the installation.

Dual-Sensor Imaging

The P4708-PLVE incorporates two 1/2.8-inch RGB CMOS image sensors, each supporting 3840 × 2160 resolution. Both camera heads provide independent positioning, allowing the viewing directions to be adjusted for different areas of interest.

The integrated varifocal lenses operate across a focal length range of 3.2–8.1 mm and provide 2.5x optical zoom. Remote zoom and focus functionality simplifies adjustment without requiring manual access to the camera heads after installation.

Axis Lightfinder and Forensic WDR technologies help preserve useful image information in challenging lighting conditions. The camera also supports day/night functionality and integrated infrared illumination for monitoring in low-light environments.

Video Analytics and Processing

The camera uses the ARTPEC-8 platform and supports deep-learning-based video analytics through AXIS Object Analytics. Supported detection capabilities include classification of humans, vehicles and vehicle types.

Metadata generated by supported analytics applications can assist video management systems with searching and reviewing relevant events. Additional applications can be deployed through the AXIS Camera Application Platform (ACAP).

Network and Video Integration

The P4708-PLVE uses a Gigabit Ethernet network interface and operates as a multidirectional camera under one IP address. It supports H.264, H.265 and Motion JPEG video formats, together with Axis Zipstream technology for bandwidth and storage optimization.

ONVIF support facilitates integration with compatible network video management systems. The camera also supports local video storage through a memory card slot.

Outdoor Protection and Installation

The camera features an outdoor-rated enclosure with IP66 and IP67 ingress protection and IK10 impact resistance. These ratings address protection against dust, water ingress and mechanical impact.

Its installation options include compatible junction box, bracket and tripod mounting arrangements. The two camera heads can be positioned independently to configure the required panoramic coverage.

Key Features

  • Two independent 8MP image sensors providing dual-direction panoramic surveillance.
  • 2.5x optical zoom with remotely adjustable zoom and focus.
  • Integrated 360° infrared illumination for low-light surveillance.
  • ARTPEC-8 processing with deep-learning-based video analytics.
  • IP66/IP67 weather protection and IK10 impact resistance.

Applications

  • Commercial building entrances and exterior monitoring.
  • Industrial facilities and manufacturing premises.
  • Parking areas and vehicle monitoring installations.
  • Warehouses and distribution facilities.
  • Perimeter surveillance requiring two independently positioned camera views.

DC Supplies Product Note

The P4708-PLVE provides two independently adjustable camera views through one IP address. When planning installation, consider the positioning of both camera heads and their respective fields of view rather than treating the unit as a conventional single-view camera.

The camera supports PoE+ Class 4 power. Verify that the selected network switch or PoE injector provides the required power budget before installation.

Specifications

SpecificationDetails
BrandAXIS
ManufacturerAxis Communications
Part Number / MPN02944-001
EAN7331021086647
Product ModelP4708-PLVE
Product SeriesAXIS P47 Series
Product TypeMultidirectional Panoramic Network Camera
Camera ConfigurationDual Sensor
Image Sensors2 × 1/2.8-inch RGB CMOS
Resolution per Sensor3840 × 2160 (8MP)
Maximum Video Resolution3840 × 2160
Maximum Frame Rate30 fps
Lens TypeVarifocal
Focal Length3.2–8.1 mm
Optical Zoom2.5x
Lens ApertureF1.9–F3.2
FocusRemote zoom and focus
Wide Dynamic RangeForensic WDR
Low-Light TechnologyAxis Lightfinder
Infrared Illumination360° IR illumination
Day/Night FunctionYes
Video CompressionH.264, H.265, Motion JPEG
Bandwidth OptimizationAxis Zipstream
ProcessorARTPEC-8
Video AnalyticsAXIS Object Analytics
Network InterfaceGigabit Ethernet
Network ArchitectureOne IP address for both camera heads
Local StorageMemory card slot
Power over EthernetPoE+ IEEE 802.3at, Class 4
Maximum Power Consumption18.8 W
Ingress ProtectionIP66, IP67
Impact ProtectionIK10
Operating Temperature-30°C to +50°C
Housing ColourWhite
Warranty5 years, subject to manufacturer warranty terms

Frequently Asked Questions

1. How many camera sensors does the AXIS P4708-PLVE have?

It has two independent 8MP RGB CMOS image sensors. Each camera head can be positioned separately to monitor a different viewing direction.

2. Does the P4708-PLVE support optical zoom?

Yes. Both camera heads feature varifocal lenses with 2.5x optical zoom and remote zoom and focus adjustment.

3. Does this camera support night surveillance?

Yes. It includes 360° infrared illumination and day/night functionality for monitoring in low-light conditions.

4. Can both camera heads operate using one IP address?

Yes. The multidirectional camera is designed to provide both camera views through one network connection and IP address.

5. Does the camera support AI-based detection?

Yes. AXIS Object Analytics supports detection and classification of humans, vehicles and vehicle types using deep-learning-based processing.

6. What power source does the P4708-PLVE require?

The camera supports PoE+ using IEEE 802.3at Class 4. The network switch or PoE injector must provide a sufficient power budget for the camera.

  • All packages are shipped same day if the order is placed before 3PM CST

    We use UPS/FedEx to ship the packages with different service levels offered by UPS/FedEx

    Overnight Shipping take 1 business day
    Expedited Shipping take about 2-3 business days
    Ground shipping take about 3-5 business days

    You can select the desired service level at Checkout and we will make sure the package is shipped as per the selected service level.

  • We Accept

    i) PayPal
    ii) All Credit & Debit Cards
    iii) Purchase Orders
    iv) Check
    v) Bank Transfer/ACH/Wire Transfer

    To process the order through Paypal/CC, you can simply checkout and process the payment.

    If you want to issue us Purchase Order/Check/Bank Transfer, Please contact us at the following details

    Call: 469.458.9636
    Email: sales@dcsupplies.net

  • If you have any queries, please contact us at the following details and we will be happy to help

    Call
    469.458.9636
    469.458.9638

    Email
    sales@dcsupplies.net

Reviews

Reviews

Write your review!

No customer reviews for the moment.

Write a review

AXIS 02944-001 P4708-PLVE 2 8MP Panoramic Network Camera

AXIS 02944-001 P4708-PLVE 2 8MP Panoramic Network Camera

Dual-sensor outdoor panoramic network camera featuring two 8MP sensors,

Close