The Ergotron 97-783 Dual Monitor and Handle Kit is designed to expand a compatible Ergotron monitor mount to support two displays side by side. It provides a practical upgrade for users who need additional screen space for multitasking, monitoring information or managing multiple applications.
The kit includes a monitor crossbar, two monitor pivots, a central handle and mounting hardware. The handle makes it easier to reposition the displays together, while the mounting arrangement supports 360° screen rotation. Its polished aluminium crossbar and black components complement compatible Ergotron mounting systems.
Key Features
- Dual-display conversion: Adapts a compatible single-monitor mount for two monitors positioned side by side.
- Combined load capacity: Supports a total display weight of up to 36 lb (16.3 kg), with a maximum of 18 lb (8.2 kg) per monitor.
- 360° screen rotation: Allows compatible displays to rotate for flexible viewing orientation.
- Convenient repositioning handle: Helps users move both displays together when adjusting their viewing position.
- Integrated cable management: Helps route display cables behind the monitors for a tidier workspace.
Product Specifications
| Brand | Ergotron |
|---|
| MPN | 97-783 |
|---|
| Product Type | Dual Monitor and Handle Kit |
|---|
| Display Configuration | Two monitors side by side |
|---|
| Recommended Monitor Size | Typically 17–24 inches; some monitors up to 26 inches may fit depending on their width |
|---|
| Maximum Display Weight | 18 lb (8.2 kg) per monitor |
|---|
| Maximum Combined Display Weight | 36 lb (16.3 kg) |
|---|
| Display Rotation | 360° |
|---|
| Mounting Interface | Compatible four-hole interfaces, including 50 × 50 mm and 100 × 100 mm patterns |
|---|
| Display VESA Compatibility | 75 × 75 mm and 100 × 100 mm |
|---|
| Materials and Finish | Polished aluminium crossbar with black components |
|---|
| Dimensions | Approximately 739 × 38 × 102 mm (29.1 × 1.5 × 4 inches) |
|---|
| Included Components | Monitor crossbar, two monitor pivots, handle and mounting hardware |
|---|
| Warranty | 5 years, subject to manufacturer's warranty terms |
|---|
Monitor Compatibility and Weight Capacity
The kit is intended for compatible Ergotron mounts with the required four-hole mounting interface. Although monitors are commonly listed in the 17–24-inch range, actual fit depends on the outside width of each display. Ergotron's specifications indicate a suitable monitor width of approximately 14–24.5 inches (35–62 cm).
The combined weight of both monitors must not exceed 36 lb (16.3 kg), and neither monitor should exceed 18 lb (8.2 kg). The kit itself adds approximately 6 lb (2.7 kg) to the mounting system, so the original mount's permitted load capacity must be reduced accordingly. Additional restrictions may apply to thicker displays or specific mounting configurations.
DC Supplies Product Note
Before ordering, confirm that your existing mount supports the 97-783 kit and has the correct mounting interface. Check both monitors' weight and physical width, and ensure the complete assembly remains within the original mount's revised load limit. This product is a conversion accessory; the monitor arm or stand is not included.
Frequently Asked Questions
1. What is the Ergotron 97-783 used for?
It converts a compatible single-monitor mount into a dual-monitor setup, allowing two displays to be positioned side by side.
2. What is the maximum supported weight?
The kit supports up to 36 lb (16.3 kg) combined, with a maximum of 18 lb (8.2 kg) per monitor. The original mount must also support the complete assembly after accounting for the kit's additional weight.
3. Which monitor sizes are compatible?
It is generally suited to monitors measuring 17–24 inches, with some displays up to 26 inches potentially compatible. Check the physical width of each monitor rather than relying on diagonal screen size alone.
4. Which mounting interfaces does it support?
The kit attaches to compatible mounts using the specified four-hole interface patterns, including 50 × 50 mm and 100 × 100 mm. The monitor pivots support common 75 × 75 mm and 100 × 100 mm VESA patterns.
5. Does the kit include a handle?
Yes. A central handle is included to help reposition the two displays together. The kit also includes the crossbar, two monitor pivots and mounting hardware.
6. Is the original monitor arm included?
No. The 97-783 is a dual-monitor conversion accessory. A compatible monitor arm or stand must be available separately.
