APC SMC1000-2UC - Smart-UPS C 1000VA 120V UPS
Overview
APC SMC1000-2UC is a line-interactive uninterruptible power supply designed to protect critical desktop systems, network devices, and small servers operating on 120 V AC power. IT administrators and small business professionals deploy this UPS in offices, network closets, and edge infrastructure to maintain uptime during utility outages, voltage sags, and brownouts.
The unit delivers 1000 VA / 650 W output capacity with a simulated sine-wave output, suitable for moderate loads such as workstations, routers, and entry-level servers. Its line-interactive architecture incorporates Automatic Voltage Regulation (AVR) to correct low- and high-voltage conditions without switching to battery whenever possible, preserving runtime for actual power interruptions.
In a tower form factor, SMC1000-2UC is placed adjacent to equipment or near network racks where space permits. Power input is provided via a NEMA 5-15P connector, and protected outlets on the rear panel include eight NEMA 5-15R receptacles delivering both battery-backup and surge protection. The UPS integrates basic surge filtering to mitigate transient voltage events that could affect sensitive electronics.
Management connectivity includes USB and serial communication ports for integration with automated shutdown software and local monitoring tools, enabling graceful system shutdown during extended power failures. The unit also supports integration with APC PowerChute software for power event logging and alerting.
The internal maintenance-free sealed lead-acid battery module provides approximately 7-10 minutes of runtime at half load and ~3-5 minutes at full load, giving administrators sufficient time to complete orderly system shutdowns or ride through short interruptions. Batteries are user-replaceable and recharge in approximately 4-6 hours following a discharge.
APC SMC1000-2UC is intended for deployments requiring moderate power protection in 120 V environments. It is not suited for high-density rack installations or high-power server loads that exceed its 650 W capacity.
Key Features
1000 VA / 650 W line-interactive UPS
Automatic Voltage Regulation (AVR)
Tower form factor for desktop or rack-adjacent placement
USB and serial management interfaces
Eight battery-backup and surge outlets
Specifications
| Specification | Detail |
|---|
| Brand | APC by Schneider Electric |
| Part Number | SMC1000-2UC |
| Product Type | Tower Line-Interactive UPS |
| UPS Topology | Line-Interactive |
| Output Capacity | 1000 VA / 650 W |
| Nominal Input Voltage | 120 V AC |
| Nominal Output Voltage | 120 V AC |
| Output Waveform | Simulated sine wave |
| Input Connector | NEMA 5-15P |
| Output Receptacles | 8 × NEMA 5-15R |
| Surge Protection | Yes |
| Voltage Regulation | AVR (boost/buck) |
| Transfer Time | ~6-10 ms |
| Battery Type | Sealed lead-acid (VRLA) |
| Typical Recharge Time | 4-6 hours |
| Runtime (Full Load) | ~3-5 min |
| Runtime (Half Load) | ~7-10 min |
| Communication Interfaces | USB, Serial |
| Software Support | APC PowerChute compatible |
| Dimensions (H×W×D) | ~285 × 97 × 340 mm |
| Net Weight | ~10.9 kg |
| Operating Temp | 0 °C - 40 °C |
| Operating Humidity | 0-95 % non-condensing |
