Eaton OMNIVS1000LCD - Line-Interactive UPS 1000 VA 120 V

Overview

The Eaton OMNIVS1000LCD is a line-interactive uninterruptible power supply (UPS) built to provide battery backup and automatic voltage regulation (AVR) for 120 V single-phase IT and electronic equipment. It is deployed by IT infrastructure engineers and facilities technicians to maintain power continuity for network devices, servers, storage, and desk-side equipment during utility power disturbances such as brownouts, blackouts, overvoltages, and electrical noise. The integrated AVR corrects common voltage fluctuations without immediately switching to battery, preserving battery life while stabilizing output.

The unit delivers 1000 VA / 500 W output capacity, supporting moderate IT loads such as small rackmount servers, network switches, firewalls, and peripherals. Output is delivered through eight NEMA 5-15R outlets (typically six battery-backed and two surge-only), allowing separation of critical equipment from less essential loads. Runtime at half load is approximately 12 minutes, and at full load around 3.5 minutes, providing sufficient window for controlled shutdowns or bridging to standby power.

Physical placement is tower-oriented, suitable for standalone use in network closets, branch IT rooms, and edge deployments where 120 V AC is the standard and rack space is limited. The design does not include dedicated 19-inch rack mounting hardware; if rack installation is needed, third-party brackets may be required.

Communication capability includes a USB (HID-compliant) port for local monitoring and safe shutdown scripting via Eaton's PowerAlert software or compatible network UPS tools. Front panel indicators and an LCD provide real-time status on input/output voltage, load level, and battery condition, aiding on-site diagnostics.

A practical deployment example is powering an edge network rack with a small server, switch, and security appliance. During a short utility outage, the UPS supports continuous operation and provides time for orderly shutdown or transition to a generator. Consideration should be given to total load size and expected outage duration when selecting this unit.

This model is not suitable for high-availability core data center racks, high-density loads, or environments that require integrated network-based UPS management. For those use cases, rack UPS systems with SNMP/web card support and external battery options are recommended.

Key Features

• Line-interactive UPS with automatic voltage regulation (AVR)
• 1000 VA / 500 W output supporting 120 V AC equipment
• (6) battery-backed and (2) surge-only NEMA 5-15R outlets
• USB HID communications with local monitoring
• Front panel LCD for voltage, load, and battery status

Specifications