Eaton OMNIVSX1500 – 1.5 kVA Line‑Interactive UPS

Overview

The Eaton OMNIVSX1500 is a 1.5 kVA / 900 W line‑interactive UPS designed to provide basic battery backup and voltage regulation for 230 V equipment. It is used by IT infrastructure engineers and facilities teams to support network devices, office servers, and communications gear against brownouts, surges, and short utility outages. ([turn0search2][turn0search4])

This UPS delivers 1500 VA / 900 W capacity with automatic voltage regulation (AVR) that corrects low and high input voltages to maintain a stable 230 V output without drawing battery power during moderate fluctuations. The internal 24 V battery system supports short runtime events and orderly shutdowns when external power is lost. ([turn0search4][turn0search5])

The unit is configured in a tower form factor, suitable for small office environments, network closets, edge compute sites, or standalone workstations where a dedicated rack unit is not required. Local status and load information are presented on a front LCD touchscreen, and a USB HID port enables connection to management software for safe system shutdown and event logging. ([turn0search4][turn0search5])

Voltage regulation corrects brownouts and overvoltages within a broad range (170 V–280 V), reducing stress on connected equipment. Eight IEC 60320 C13 outlets deliver both battery backup and surge protection. The UPS also incorporates EMI/RFI filtering to mitigate electrical noise on the AC line. ([turn0search2][turn0search4])

Runtime is approximately ~6.5 minutes at half load, adequate for saving files and initiating controlled shutdown procedures on modest server and network loads. Recharge time from depleted battery to ~90 % capacity is typically under 8 hours. This unit is not intended for parallel redundancy configurations or extended runtime applications requiring external battery packs. ([turn0search0][turn0search4])

Key Features

• 1500 VA / 900 W line‑interactive UPS topology
• AVR corrects 170–280 V input without battery use
• Eight IEC 60320 C13 outlets (230 V)
• Front LCD touchscreen with USB HID monitoring
• EMI/RFI noise filtering and surge suppression

Technical Specifications