Detailed Specifications
Eaton SMART1000RM2UN Tripp Lite Line Interactive Rack Tower UPS 120V
Overview
The Eaton SMART1000RM2UN is a 1 kVA (approximately 800 W) line-interactive UPS built to protect server racks, network closets and edge infrastructure where space is limited but uptime is critical. It delivers pure sine-wave output and automatic voltage regulation (AVR) to correct under- and over-voltage conditions without switching to battery, helping to preserve battery standby time for actual outages. With a 2U rack/tower convertible form-factor, it fits neatly into standard 19″ cabinets or can stand upright in tower mode×ideal for network closets and remote branch deployments.In real-world environments, this UPS supports mission-critical equipment × switches, routers, edge servers and storage nodes × by providing clean, regulated power and giving IT staff enough time to save state and orderly shut down systems during a utility failure. The front-panel LCD provides real-time feedback on load level, battery status and input/output voltage, so you can monitor health at a glance rather than waiting for alarms. Communication ports (USB/DB9) and optional network card support enable remote monitoring and automated shutdowns, which matter when gear is distributed or unmanned.For deployments where backup time is limited but managed load matters, the SMART1000RM2UN allows you to prioritise essential devices: by shedding non-critical loads you extend runtime for the devices that count. Whether you're protecting a small server rack in a branch office, a remote network aggregation point, or a media server stack, the SMART1000RM2UN delivers reliable protection in a compact footprint×engineered for the engineer who doesn't want fluff, just gear that works.
Key Features
1 kVA line-interactive backup with pure sine-wave output × supports rack and network gear with active-PFC power supplies
Automatic Voltage Regulation (AVR) corrects brownouts and high-voltage conditions without tapping the battery
2U rack/tower convertible form factor keeps rack space efficient and flexible for branch or edge deployments
USB and DB9 communication ports plus optional network card for remote monitoring and shutdown automation
Prioritized load control: managed outlets allow non-essential gear to be shed, extending runtime for critical devices
Specifications
| Specification | Detail |
|---|
| Brand | Eaton |
| Part Number | SMART1000RM2UN |
| Product Type | Line-Interactive UPS |
| Capacity | 1,000 VA / ~800 W |
| Output Waveform | Pure sine wave |
| Input Voltage Range | ~83 V to ~147 V AC (AVR corrects within this window) |
| Nominal Output Voltage | 120 V AC |
| Outlets | 6 × NEMA 5-15R |
| Communication Ports | USB, DB9 serial |
| Form Factor | 2U rack/tower convertible (≈ 3.5″ height) |
| Dimensions (H×W×D) | ~3.45″ × ~17.35″ × ~12.50″ (≈ 87 mm × 441 mm × 318 mm) |
| Weight | ~35 lb (≈ 16 kg) |
| Warranty | Manufacturer standard (registration may extend coverage) |
