Overview
The Seagate IronWolf ST10000VN0004 is a 10TB internal hard drive designed for network-attached storage (NAS) systems. Its 3.5-inch form factor, SATA 6Gb/s interface, and 7200RPM spindle speed make it suitable for compatible multi-bay storage enclosures used for centralized file storage, backups, and shared data access.
This model belongs to the Seagate IronWolf product family, which is designed for NAS workloads involving multiple users and continuous storage-system operation.
Technical Information
The drive uses conventional magnetic recording (CMR) and has a 256MB cache buffer. Native Command Queuing (NCQ) supports command management, while S.M.A.R.T. provides drive-health information to compatible host systems.
Rotational vibration sensors and dual-plane balance features are designed to address vibration in multi-drive enclosures. The manufacturer specifies a maximum sustained data transfer rate of up to 210MB/s under its stated test conditions. Actual results vary with workload, host hardware, and storage configuration.
Compatibility and Deployment
The ST10000VN0004 connects through a SATA 6Gb/s interface and is designed for a standard 3.5-inch drive bay. Seagate specifies support for NAS configurations containing one to eight drive bays.
Before installation, verify the NAS manufacturer's compatibility list, maximum supported drive capacity, available bay size, and requirements for the intended RAID configuration. Interface compatibility alone does not guarantee that every NAS system supports this exact model.
Key Features
- 10TB capacity: Provides high-capacity storage for centralized files, backups, and shared data.
- CMR recording: Uses conventional magnetic recording technology.
- Rotational vibration sensors: Designed to help manage rotational vibration in multi-drive NAS enclosures.
- NCQ support: Supports command queuing through compatible SATA host systems.
- S.M.A.R.T. monitoring: Allows compatible systems to retrieve drive-health and diagnostic information.
Applications
- Centralized network storage for home and small-business environments.
- Compatible multi-bay NAS systems.
- Shared file repositories and general-purpose storage servers.
- NAS-based backup and data-retention systems.
DC Supplies Product Note
For multi-drive NAS installations, consider the workload limit as well as available storage capacity. Seagate specifies a workload rate limit of 180TB per year for this model. If the system will process a high volume of repeated writes, verify that the expected annual workload remains within the manufacturer's guidance.
Specifications
| Specification | Details |
|---|
| Brand | Seagate |
| Manufacturer | Seagate Technology |
| Product Family | IronWolf |
| Part Number / MPN | ST10000VN0004 |
| Product Type | Internal NAS Hard Drive |
| Storage Capacity | 10TB |
| Form Factor | 3.5-inch |
| Interface | SATA 6Gb/s |
| Spindle Speed | 7200RPM |
| Cache Buffer | 256MB |
| Recording Technology | Conventional Magnetic Recording (CMR) |
| Maximum Sustained Data Transfer Rate | Up to 210MB/s |
| Maximum I/O Data Transfer Rate | 600MB/s |
| NAS Drive Bay Support | 1–8 bays |
| Rotational Vibration Sensors | Yes |
| Dual-Plane Balance | Yes |
| Error Recovery Control | Yes |
| Native Command Queuing | Supported |
| S.M.A.R.T. Monitoring | Supported |
| Annual Workload Rate Limit | 180TB/year |
| Load/Unload Cycle Rating | 600,000 cycles |
| MTBF | 1,000,000 hours |
| Operating Ambient Temperature | 5°C minimum |
| Maximum Drive Case Temperature | 70°C |
| Dimensions (H × W × D) | 26.11 × 101.85 × 146.99mm maximum |
| Weight | 650g typical |
| Limited Warranty | 3 years, subject to applicable terms and eligibility |
Frequently Asked Questions
1. Is the ST10000VN0004 designed for NAS systems?
Yes. Seagate identifies this model as an IronWolf drive for NAS environments and specifies support for configurations with one to eight drive bays.
2. Does this drive use CMR recording?
Yes. The ST10000VN0004 uses conventional magnetic recording (CMR).
3. Will it work with my existing NAS?
Compatibility depends on the NAS model, supported drive capacity, physical bay size, and firmware or system requirements. Check the NAS manufacturer's supported-drive documentation before purchasing.
4. Can the drive be used in RAID storage?
It is designed for multi-drive NAS environments. Confirm that your NAS supports this exact model and the intended RAID level before deployment.
5. Are SATA cables and mounting accessories included?
Included accessories depend on the specific sales package. Do not assume that SATA cables, mounting hardware, or other accessories are included unless the supplier confirms them.
6. How can I verify the warranty?
Seagate lists a three-year limited warranty for this model family. Actual coverage depends on the individual drive's eligibility, serial number, country of purchase, and applicable warranty terms.
