The Ergotron 98-035 LX Dual Arm Grommet Mount Kit is a mounting accessory designed for compatible Ergotron LX monitor arms. It provides an alternative to a conventional desk-edge clamp by securing the monitor arm through a suitable hole in the desk or worksurface. This arrangement is useful when a centrally positioned mounting point is preferred or when desk-edge space is limited.
Constructed from sturdy steel, the grommet mount provides a stable base for compatible monitor arm installations. It is designed for use with the LX Dual Side-by-Side Arm and LX Dual Stacking Arm, as well as the LX Desk Mount Arm Tall Pole configuration. Check the exact arm model and worksurface dimensions before installation.
Key Features
- Through-desk mounting: Secures a compatible monitor arm through a suitable worksurface hole.
- Sturdy steel construction: Provides a durable mounting base for supported LX arm configurations.
- Flexible positioning: Allows the arm to be mounted at an appropriate location on the desk rather than only at the edge.
- Broad LX compatibility: Designed for compatible LX dual-monitor arms and the LX Desk Mount Arm Tall Pole.
- 10-year limited warranty: Covered by Ergotron's limited manufacturer warranty.
Product Specifications
| Brand | Ergotron |
|---|
| Manufacturer Part Number | 98-035 |
|---|
| Product Name | LX Dual Arm Grommet Mount Kit |
|---|
| Product Type | Monitor arm mounting accessory |
|---|
| Material | Steel |
|---|
| Mounting Method | Through-worksurface grommet mount |
|---|
| Compatible Arms | Ergotron LX Dual Side-by-Side Arm, LX Dual Stacking Arm, and compatible LX Desk Mount Arm Tall Pole configuration |
|---|
| Supported Hole Width | 5/16–2 inches (approximately 7–51 mm) |
|---|
| Maximum Worksurface Thickness | Up to 3 inches (approximately 76 mm) |
|---|
| Warranty | 10-year limited warranty |
|---|
| EAN | 0698833058383 |
|---|
Compatibility and Installation
Before purchasing, verify that your monitor arm is compatible with the Ergotron 98-035 kit. The worksurface must have a suitable mounting hole measuring approximately 5/16–2 inches (7–51 mm) wide, with a thickness of no more than 3 inches (76 mm). Confirm the mounting requirements for your specific arm and follow the manufacturer's installation instructions.
This product is a mounting accessory, not a complete monitor arm. Monitors and the compatible LX arm are not included unless explicitly stated by the seller.
DC Supplies Product Note
DC Supplies recommends checking the monitor arm model number and desk measurements before ordering. The Ergotron 98-035 is intended for compatible LX arm configurations; do not assume that it fits every Ergotron monitor mount.
Frequently Asked Questions
1. What is the Ergotron 98-035 used for?
It is a grommet mounting kit that allows a compatible Ergotron LX monitor arm to be attached through a suitable hole in a desk or worksurface.
2. Which Ergotron arms are compatible?
Compatible configurations include the LX Dual Side-by-Side Arm, LX Dual Stacking Arm, and the LX Desk Mount Arm Tall Pole. Confirm compatibility with your exact model before ordering.
3. What size desk hole is required?
The specified mounting hole width is approximately 5/16–2 inches (7–51 mm). The worksurface can be up to 3 inches (76 mm) thick, subject to the requirements of the compatible arm.
4. Is the monitor arm included?
No. The 98-035 is a mounting accessory. The compatible monitor arm and monitors are separate products unless the seller specifically states otherwise.
5. What material is the mount made from?
The mount is constructed from steel for a sturdy mounting solution.
6. What warranty does this product have?
The Ergotron 98-035 is listed with a 10-year limited warranty, subject to the manufacturer's warranty terms.
