Ubiquiti UACC-UPLINK-SFP28-30M – UniFi 30m SFP28 Uplink Cable
Overview
The Ubiquiti UACC-UPLINK-SFP28-30M is a 30-meter Uplink Cable designed for SFP-based interconnects between compatible UniFi networking devices. It uses SFP28-to-SFP28 connectors and supports 1 Gbps, 10 Gbps, and 25 Gbps data rates.
The cable incorporates automatic link optimization for link speed and stability when interconnecting UniFi devices. The 30-meter version uses a fiber cable construction with a slim white PVC jacket.
Technical Information
The UACC-UPLINK-SFP28-30M supports SFP28, SFP+, and SFP interfaces and is designed to accommodate 25G, 10G, and 1G interconnects. The cable has a 3 mm outer diameter and a minimum bend radius of 30 mm for the 30-meter version.
Ubiquiti specifies an operating temperature range of 0°C to 70°C. The cable is supplied as a single 30-meter unit.
Compatibility
The UACC-UPLINK-SFP28-30M is compatible with networking equipment providing SFP28, SFP+, or SFP interfaces and is specifically designed for automatic link optimization between UniFi devices.
For deployment, verify that both connected devices support the required SFP interface and intended 1G, 10G, or 25G link rate.
Key Features
- 30-meter cable length
- SFP28-to-SFP28 connector configuration
- Supports 1 Gbps, 10 Gbps, and 25 Gbps data rates
- Automatic link optimization for UniFi interconnects
- 3 mm white PVC cable jacket
Applications
The UACC-UPLINK-SFP28-30M is intended for longer-distance switch and network-device interconnects where compatible SFP interfaces are available. The 30-meter length can be used for rack-to-rack, equipment-room, and data-center network links where the supported interface and link rate requirements are met.
DC Supplies Product Note
The 30-meter UACC-UPLINK-SFP28-30M uses fiber construction, unlike the shorter copper versions in the same Uplink Cable family. Confirm the required cable length and interface type before ordering.
Specifications
| Specification | Details |
|---|
| Brand | Ubiquiti |
| Part Number / MPN | UACC-UPLINK-SFP28-30M |
| Product Type | Uplink Cable |
| Cable Length | 30 m (98.4 ft) |
| Connector Type | SFP28 to SFP28 |
| Supported Data Rates | 25 / 10 / 1 Gbps |
| Compatible Interfaces | SFP28, SFP+, SFP |
| Auto Link Optimization | Yes |
| Cable Construction | Fiber |
| Jacket Material | PVC |
| Jacket Color | White |
| Jacket Outer Diameter | 3 mm |
| Minimum Bend Radius | 30 mm |
| Operating Temperature | 0°C to 70°C |
| Pack Quantity | 1 |
FAQs
What data rates does the UACC-UPLINK-SFP28-30M support?
The cable supports 25 Gbps, 10 Gbps, and 1 Gbps data rates.
What connectors are used on the UACC-UPLINK-SFP28-30M?
It uses an SFP28 connector on both ends.
Can the cable be used with SFP+ equipment?
Yes. Ubiquiti specifies compatibility with SFP28, SFP+, and SFP interfaces, subject to the supported link rate of the connected equipment.
Does this 30-meter version use copper or fiber?
The 30-meter version uses fiber construction. Ubiquiti specifies copper for the 0.15 m and 0.3 m versions and fiber for the 3 m and 30 m versions.
What is the minimum bend radius?
The specified minimum bend radius for the 30-meter version is 30 mm.
