Product Overview
The Panduit UTPSP10YLY TX6 PLUS is a 10-foot Category 6 unshielded twisted-pair Ethernet patch cable designed for structured cabling systems, network equipment, and office connectivity. Its yellow jacket helps identify and organise network connections, while RJ45 modular plugs provide connectivity to compatible Ethernet ports.
Constructed with 24 AWG stranded copper conductors, this patch cord is designed for network connections between computers, switches, routers, patch panels, and other compatible equipment. Its 10-foot length provides approximately 3.05 metres of cable for connecting devices across a workstation or equipment rack.
Key Features
- Category 6 performance: Designed for Cat 6 Ethernet networking applications.
- 10-foot cable length: Provides approximately 3.05 metres for device-to-device network connections.
- Yellow jacket: Helps visually identify and organise network connections.
- RJ45 connectors: Plug-to-plug configuration supports compatible Ethernet interfaces.
- TX6 PLUS construction: Features 24 AWG stranded copper conductors, a snag-resistant latch design, and a slim strain-relief boot.
Technical Information
The UTPSP10YLY belongs to Panduit's TX6 PLUS Category 6 UTP patch cord range. It uses unshielded twisted-pair construction with stranded 24 AWG copper conductors and a CM-rated PVC cable jacket.
The cable uses an RJ45 plug at each end and follows the T568B wiring scheme. Its design supports structured Ethernet cabling installations where a flexible patch cord is needed between network devices and compatible connection points.
Applications
- Connecting computers and workstations to Ethernet network ports.
- Connecting switches, routers, and compatible patch panels.
- Structured cabling installations in offices and commercial environments.
- Network equipment racks and communications cabinets.
- Organising network connections through colour-coded patch cabling.
Product Specifications
| Specification | Details |
|---|
| Brand | Panduit |
| Part Number / MPN | UTPSP10YLY |
| Product Type | Ethernet patch cable |
| Product Series | TX6 PLUS |
| Cable Category | Category 6 (Cat 6) |
| Cable Construction | Unshielded twisted pair (U/UTP) |
| Cable Length | 10 ft (approximately 3.05 m) |
| Cable Colour | Yellow |
| Connector Configuration | RJ45 plug to RJ45 plug |
| Connector Format | 8-position, 8-contact (8P8C) |
| Conductor Gauge | 24 AWG |
| Conductor Type | Stranded copper |
| Nominal Cable Diameter | Approximately 5.8 mm |
| Jacket Material | PVC |
| Flammability Rating | CM |
| Wiring Scheme | T568B |
| Latch Design | Tangle-free latch |
| RapidID Support | RapidID-enabled patch cord |
| Operating Temperature | -10°C to 60°C |
Compatibility
The Panduit UTPSP10YLY is intended for network equipment with compatible RJ45 Ethernet ports and Cat 6 patch cabling. It can be used in structured cabling systems where the connected equipment and installed channel meet the applicable performance requirements.
Check the cable length, yellow colour, and connector type before ordering to ensure they match your installation requirements.
DC Supplies Product Note
The yellow jacket can help distinguish this cable from other network connections in a rack or workstation. For an organised installation, use a consistent colour-coding plan and confirm that the 10-foot length provides sufficient reach without creating unnecessary cable loops.
Frequently Asked Questions
What category is the Panduit UTPSP10YLY?
It is a Category 6 (Cat 6) Ethernet patch cable from Panduit's TX6 PLUS range.
How long is this cable?
The cable is 10 feet long, approximately 3.05 metres.
What colour is the UTPSP10YLY?
This model has a yellow cable jacket, which can help with network cable identification and organisation.
What connectors does this patch cord use?
It has an RJ45 plug at each end for compatible Ethernet ports.
Is this cable shielded?
No. The UTPSP10YLY uses unshielded twisted-pair (U/UTP) construction.
Can I use this cable with Gigabit Ethernet?
Yes. Cat 6 patch cabling is suitable for Gigabit Ethernet when the connected equipment and complete cabling channel meet the relevant requirements.
