Overview
The Ubiquiti U-Cable-Patch-1M-RJ45-BL is a 1-metre UniFi Cat6 Ethernet patch cable designed for indoor network connections. It features blue sleeving, two bendable booted RJ45 connectors, and an ultra-thin 3mm outer diameter for compact cable routing.
The cable supports Gigabit Ethernet and is suitable for connecting compatible switches, access points, gateways, patch panels, computers, and other RJ45-equipped network devices.
Technical Information
This patch cable uses unshielded twisted-pair construction with stranded copper conductors and a thermoplastic elastomer jacket. The 30 AWG conductors and 3mm jacket diameter provide a slim form factor suited to organised patching and higher-density network areas.
Both ends use bendable booted RJ45 connectors. Ubiquiti specifies GbE data-rate support and PoE support up to PoE+++. The cable conforms to TIA/EIA-568-B.2 and ISO/IEC 11801 standards.
Key Features
- 1m length for short equipment-to-equipment Ethernet connections
- Cat6 construction supporting Gigabit Ethernet
- Ultra-thin 3mm outer diameter for compact routing
- Bendable booted RJ45 connectors for flexible installation
- Blue jacket for straightforward cable identification
Applications
The U-Cable-Patch-1M-RJ45-BL is suitable for indoor Ethernet patching between network switches, patch panels, access points, gateways, computers, and other compatible network equipment. Its 1m length is well suited to short rack and equipment connections.
Compatibility
The cable uses standard male RJ45 connectors at both ends and is intended for Ethernet devices with compatible RJ45 ports. It supports Gigabit Ethernet and is specified for indoor operation.
DC Supplies Product Note
The 1m length is useful for keeping nearby network equipment connected without introducing unnecessary cable slack, while the 3mm profile helps maintain a compact patching layout.
Specifications
| Brand | Ubiquiti |
|---|
| Part Number / MPN | U-Cable-Patch-1M-RJ45-BL |
|---|
| Product Type | Ethernet Patch Cable |
|---|
| Product Family | UniFi |
|---|
| Cable Category | Cat6 |
|---|
| Cable Length | 1m |
|---|
| Colour | Blue |
|---|
| Connector 1 | RJ45 Male |
|---|
| Connector 2 | RJ45 Male |
|---|
| Connector Design | Bendable booted RJ45 |
|---|
| Outer Diameter | 3mm |
|---|
| Jacket Material | Thermoplastic elastomer (TPE) |
|---|
| Shielding Type | UTP |
|---|
| Conductor Type | Stranded copper |
|---|
| Conductor Wire Gauge | 30 AWG |
|---|
| Supported Data Rate | GbE |
|---|
| Supported PoE Type | Up to PoE+++ |
|---|
| Operating Environment | Indoor |
|---|
| Minimum Bend Radius | 24mm |
|---|
| Flame Rating | FT-2 (UL1581) |
|---|
| Standards | TIA/EIA-568-B.2, ISO/IEC 11801 |
|---|
| Installation Temperature | 0 to 60°C |
|---|
| Storage Temperature | -20 to 80°C |
|---|
| Operating Temperature | -10 to 75°C |
|---|
| Package Quantity | 1 |
|---|
FAQs
What length is the U-Cable-Patch-1M-RJ45-BL?
The cable is 1 metre long.
What category is this Ubiquiti patch cable?
It is a Cat6 Ethernet patch cable with Gigabit Ethernet support.
What connectors are fitted?
Both ends use male RJ45 connectors with bendable booted terminations.
What is the cable diameter?
The cable has an ultra-thin 3mm outer diameter.
Is it suitable for PoE?
Yes. Ubiquiti specifies support for PoE up to PoE+++.
