The Ubiquiti UACC-CABLE-PATCH-EL-C6A-2M-W is a 2 m UniFi Premium Patch Cable designed for high-speed indoor Ethernet connections. It uses a braided thermoplastic elastomer jacket, stranded copper conductors, and translucent booted shielded RJ45 connectors. Ubiquiti specifies support for data rates up to 10 GbE and PoE up to PoE+++.
Ethernet Connectivity
This Cat6A patch cable provides RJ45 connectivity for compatible Ethernet equipment. Its 2 m end-to-end length is suited to connecting network switches, access points, gateways, patch panels, and other RJ45 network devices where a short pre-terminated connection is required.
Etherlighting Support
The translucent booted RJ45 connectors are designed to provide optimal brightness for Ubiquiti Etherlighting effects when connected to compatible equipment. This connector design also provides shielded RJ45 termination for the cable.
Key Features
- 2 m end-to-end cable length for short Ethernet connections
- Supports data rates up to 10 GbE
- Translucent booted shielded RJ45 connectors designed for Etherlighting visibility
- Braided thermoplastic elastomer jacket with 3 mm outer diameter
- Supports PoE up to PoE+++ and meets TIA/EIA-568-B.2 and ISO/IEC 11801 standards
Applications
The cable is intended for indoor Ethernet installations requiring pre-terminated RJ45 connectivity. Typical uses include switch-to-patch-panel connections, switch-to-device links, and connections between compatible UniFi networking equipment.
DC Supplies Product Note
For installations where Etherlighting visibility is important, the translucent connector boots are a distinguishing feature of this cable. The 2 m length and 3 mm jacket diameter also provide a compact option for short indoor connections without using the longer cable lengths in the same product range.
Specifications
| Specification | Details |
|---|
| Brand | Ubiquiti |
| Part Number / MPN | UACC-CABLE-PATCH-EL-C6A-2M-W |
| Product Type | Cat6A Ethernet Patch Cable |
| Product Family | UniFi Premium Patch Cable |
| Cable Length | 2 m |
| Color | White |
| Supported Data Rate | Up to 10 GbE |
| Supported PoE Type | Up to PoE+++ |
| Connectors | (2) translucent booted and shielded RJ45 |
| Operating Environment | Indoor |
| Jacket Material | Thermoplastic elastomer (TPE) and braided |
| Jacket Diameter | 3 mm |
| Shielding Type | UTP |
| Conductor Type | Stranded copper |
| Conductor Wire Gauge | 34 AWG |
| Minimum Bend Radius | 24 mm |
| Flame Rating | VW-1 (UL1581) |
| Standards | TIA/EIA-568-B.2; ISO/IEC 11801 |
| Installation Temperature | -20 to 60°C (-4 to 140°F) |
| Ambient Storage Temperature | -20 to 75°C (-4 to 167°F) |
| Ambient Operating Temperature | -20 to 60°C (-4 to 140°F) |
| Pack Option | Single Unit |
Frequently Asked Questions
What is the length of the UACC-CABLE-PATCH-EL-C6A-2M-W?
The cable is 2 m long from end to end.
What network speed does this cable support?
Ubiquiti specifies support for data rates up to 10 GbE.
What connectors are fitted to the cable?
Both ends use translucent booted, shielded RJ45 connectors.
Can this cable carry PoE?
Yes. Ubiquiti specifies support for PoE up to PoE+++.
Is this cable intended for outdoor installation?
No. The exact UACC-CABLE-PATCH-EL-C6A-2M-W is specified for indoor operation. Ubiquiti offers separate outdoor patch cable models for outdoor deployments.
What is included?
The specified pack option is a single 2 m patch cable.
