Detailed Specifications
Eaton N200-010-WH Tripp Lite 10ft Ethernet patch cable Cat6a
Overview
The Eaton Tripp Lite N200-010-WH is a 10-ft Cat6 unshielded twisted-pair Ethernet patch cable with molded RJ45 male-to-male connectors. It is designed for connecting computers, printers, routers, modems, switches, and other network equipment in standard Cat5, Cat5e, and Cat6 installations.
The cable supports up to 1 Gbps Ethernet and is rated for 550 MHz communications. It uses 24 AWG four-pair stranded UTP construction with a PVC jacket. Gold-plated copper contacts support signal transfer, while integral strain relief helps protect the cable and connectors during repeated patching.
The N200-010-WH is appropriate for standard unshielded copper Ethernet where Gigabit performance is sufficient. It should not be selected where Cat6a/10G performance or shielded cabling is specifically required.
Key Features
- Cat6 Gigabit support provides up to 1 Gbps connectivity
- 24 AWG stranded UTP supports flexible network patching
- 550 MHz rating supports standard Cat6 applications
- Gold-plated RJ45 contacts support reliable signal transfer
- Integral strain relief helps protect connectors from stress
Specifications
| Specification | Verified Value |
|---|
| Brand | Eaton Tripp Lite |
| Part Number | N200-010-WH |
| Product Type | Cat6 Ethernet patch cable |
| Cable Category | Cat6 |
| Network Speed | Up to 1 Gbps |
| Cable Length | 10 ft (3.05 m) |
| Shielding | Unshielded twisted pair (UTP) |
| Connector Type | RJ45 male to RJ45 male |
| Conductor Gauge | 24 AWG |
| Conductor Construction | 4-pair stranded copper |
| Cable Type | Round |
| Jacket Material | PVC |
| Jacket Color | White |
| Frequency Rating | 550 MHz |
| Contact Plating | Gold |
| Connector Design | Molded |
| Strain Relief | Integral |
| Network Compatibility | 1000Base-T, 10/100Base-T |
| Standards | IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 |
| Compliance | ETL, RoHS |
