Eaton P134‑06N‑DVI‑V2 – DisplayPort to DVI & VGA Adapter

Overview :

The Eaton P134‑06N‑DVI‑V2 is a multi‑interface DisplayPort passive adapter designed to provide simultaneous or selectable DVI‑D and VGA outputs from a single DisplayPort source. It is deployed by AV technicians, IT infrastructure teams, and field service engineers in mixed display environments where sourcing both analog and digital signals from a DisplayPort interface simplifies staging and compatibility without carrying multiple single‑purpose adapters.

From a technical deployment perspective, the adapter integrates a DisplayPort 1.2 input and two distinct output interfaces: DVI‑D for digital video and VGA (HD15) for analog video. The unit requires a dual‑mode DisplayPort (DP++) host to support passive signal conversion, and it does not include active conversion electronics. DVI‑D output supports resolutions up to 1920 × 1200, while VGA output supports up to 1920 × 1200 analog. Both outputs are derived from the same DisplayPort source and selectable through cabling.
(Confirmed from manufacturer and authorized distributors: supports DP++ passive conversion/adapter operation)

This adapter is typically deployed at the edge layer where endpoints such as projectors, monitors, and KVM switches with legacy DVI or VGA inputs must be served by modern DisplayPort outputs on laptops, desktops, or docking stations. It is particularly useful in training rooms, conference rooms, and AV staging areas where display input types vary.

Integration is straightforward with plugged‑in DisplayPort DP++ sources; no external power or software drivers are required. Standard DisplayPort, DVI, and VGA cabling protocols are maintained, enabling interoperability with existing structured AV infrastructures. Compatibility with HDCP for DVI when applicable ensures protected content can still be displayed.

In a practical deployment scenario, a technician staging a presentation system can connect a laptop’s DisplayPort output to both a digital DVI monitor and an analog VGA projector without swapping adapters. The compact form factor also allows quick transitions between digital and analog displays in service environments.

This adapter should not be used where the host does not support DP++ signaling, nor in environments requiring high refresh rates beyond 60 Hz at high resolutions. It also is not suitable for long cable runs where active signal boosters or repeaters are required.

Key Features

• DisplayPort input to DVI‑D & VGA outputs
• Passive DP++ adapter (no external power)
• Supports up to 1920×1200 resolution
• Compact dual‑output form factor
• Works with standard DisplayPort sources

Technical Specifications