APC SRT2200RMXLA-NC 2200 VA Online UPS 120 V
Overview :
The APC SRT2200RMXLA-NC is an on-line (double-conversion) uninterruptible power supply that provides continuous, conditioned power to connected equipment without transfer delays. It is installed by IT infrastructure engineers and data centre operators to protect servers, storage systems, network switches, and communications equipment against utility power anomalies and outages in a standard 120 V single-phase distribution environment.
This UPS is rated at 2200 VA / 1800 W and delivers a pure sine-wave output, isolating loads from input disturbances such as surges, sags, and frequency variations through true online double-conversion topology. It incorporates internal bypass functionality to sustain load during internal UPS servicing or abnormal conditions.
Designed in a 2U rackmount form factor with tower convertibility, the unit integrates into standard 19″ racks in server rooms, IDF/MDF closets, or enterprise edge cabinets. Its rack design optimizes usable space and simplifies cabling.
Management and monitoring are enabled via a pre-installed Network Management Card (NIC), USB, and serial interfaces, allowing integration into APC's centralized power management platforms such as EcoStruxure IT or third-party SNMP systems for remote status visibility and graceful shutdown operations. Emergency Power Off (EPO) support adds integration with facility power controls.
Typical internal runtime at full load is ~3 min and ~10-12 min at half load, sufficient to perform orderly shutdowns or bridge short outages. Runtime can be extended with external battery packs when longer backup windows are required.
This UPS is not appropriate for direct integration into 208 V/230 V mains without the correct regional variant, nor is it designed for continuous full-runtime operation without external battery expansion.
Key Features
• 2200 VA/1800 W double-conversion online UPS
• Pure sine-wave output for sensitive IT loads
• Pre-installed Network Management Card (NIC)
• 2U rack/tower convertible with rail kit
• Scalable runtime with external battery packs
Specifications
| Parameter | Specification |
|---|
| Brand | APC by Schneider Electric |
| Part Number | SRT2200RMXLA-NC |
| Product Type | Online UPS (Double-Conversion) |
| Power Capacity | 2200 VA / 1800 W |
| Topology | Double-conversion online |
| Nominal Input Voltage | 120 V AC |
| Nominal Output Voltage | 120 V AC |
| Input Connector | NEMA 5-20P |
| Output Connectors | 6× NEMA 5-20R, 1× NEMA L5-20R |
| Output Waveform | Pure sine wave |
| Frequency | 50/60 Hz auto-sensing |
| Communications | Network Management Card, USB, Serial (RJ45) |
| EPO Support | Yes |
| Battery Chemistry | Sealed lead-acid |
| Runtime | ~3 min at full load, ~10-12 min at half load |
| Recharge Time | ~3 hours |
| Rack Height | 2U |
| Dimensions (HxWxD) | 3.35″ × 17.0″ × 23.0″ (85 × 432 × 584 mm) |
| Weight | ~55 lb (24.95 kg) |
| Operating Temp | 0-40 °C |
| Humidity | 0-95% non-condensing |
