Close
Cisco SMARTnet Authorized Reseller
26
APC SRT10KRMXLI 10kVA Smart-UPS On-Line Rackmount UPS View larger

APC SRT10KRMXLI 10kVA Smart-UPS On-Line Rackmount UPS

SRT10KRMXLI

New

APC SRT10KRMXLI Smart-UPS On-Line delivers 10,000VA/10,000W of double-conversion

×
   
 


Detailed Specifications

Overview

The APC SRT10KRMXLI Smart-UPS On-Line is a high-capacity, double-conversion online uninterruptible power supply designed for critical IT infrastructure, data centers, and enterprise equipment. It delivers 10kVA / 10kW of power at 230V output and uses a 6U rackmount chassis. Its online topology provides continuous power conditioning, while the LCD control panel, network management capability, and support for compatible external battery packs help maintain availability and enable remote monitoring.

Key Features

  • 10kVA / 10kW capacity: Designed for high-demand critical equipment.
  • Double-conversion online topology: Continuously conditions incoming power.
  • 230V output: Supports compatible 220V and 240V configurations.
  • 6U rackmount design: Designed for compatible equipment racks.
  • Multiple output connections: Includes IEC C13 and C19 outlets, IEC jumper connections, and hardwired output.
  • LCD control panel: Displays operating status, measurements, and alarms.
  • Network management: Includes a Web/SNMP management card for remote monitoring.
  • Scalable runtime: Supports compatible external battery packs.
  • Sealed lead-acid batteries: Uses an internal rechargeable battery system.
  • Emergency Power Off: Includes an EPO connection for compatible emergency shutdown systems.

Technical Specifications

SpecificationDetails
BrandAPC by Schneider Electric
Part Number / MPNSRT10KRMXLI
Product TypeUninterruptible Power Supply (UPS)
Product SeriesSmart-UPS On-Line SRT
UPS TopologyDouble-conversion online
Rated Capacity10,000VA / 10kVA
Output Power10,000W / 10kW
Nominal Input Voltage230V AC single-phase or 400V AC three-phase, depending on configuration
Nominal Output Voltage230V AC
Other Output Voltages220V and 240V configurable
Output Connections6 × IEC C13, 4 × IEC C19, 3 × IEC jumper connections, 1 × hardwired output
Input ConnectionsHardwired single-phase or three-phase configurations
Output WaveformSine wave
Battery TypeSealed lead-acid
Replacement BatteryAPC APCRBC140
Typical Recharge TimeApproximately 1.5 hours
Rack Height6U
Network ManagementWeb/SNMP management card included
Communication InterfacesEthernet, USB, RJ-45 serial, SmartSlot
Emergency Power OffSupported
Dimensions (H × W × D)10.35 × 17.01 × 28.15 inches
Net Weight246.52 lbs (111.82 kg)

Applications

  • Data centers and enterprise server rooms
  • Business-critical servers and storage systems
  • Network and telecommunications infrastructure
  • Industrial and enterprise IT installations with compatible power requirements
  • Systems requiring online power conditioning and extended runtime

Compatibility and Installation

Confirm the required input wiring, available electrical supply, and output voltage before installation. This UPS supports single-phase and three-phase input configurations depending on the wiring arrangement. Installation should be performed by qualified personnel in accordance with manufacturer instructions and applicable electrical codes. The unit occupies 6U of rack space and requires adequate clearance, ventilation, and rack load capacity. Compatible external battery packs can be added for extended runtime. Verify output connector types and total connected load before connecting equipment.

Frequently Asked Questions

What is the capacity of the APC SRT10KRMXLI?

It is rated at 10kVA and 10kW.

What type of UPS is this?

It is a double-conversion online UPS designed for continuous power conditioning.

How much rack space does it require?

The unit occupies 6U of rack space.

Can its runtime be extended?

Yes. It supports compatible external battery packs for additional runtime.

Does it support remote monitoring?

Yes. The included Web/SNMP management card and communication interfaces support remote monitoring.

Which replacement battery does it use?

The listed replacement battery cartridge is APC APCRBC140. Confirm compatibility and battery requirements before servicing.

DC Supplies Product Note

DC Supplies recommends confirming the exact MPN, input wiring configuration, output voltage, connector requirements, rack dimensions, and battery compatibility before ordering. Warranty, availability, and included accessories may vary by supplier and region.

  • All packages are shipped same day if the order is placed before 3PM CST

    We use UPS/FedEx to ship the packages with different service levels offered by UPS/FedEx

    Overnight Shipping take 1 business day
    Expedited Shipping take about 2-3 business days
    Ground shipping take about 3-5 business days

    You can select the desired service level at Checkout and we will make sure the package is shipped as per the selected service level.

  • We Accept

    i) PayPal
    ii) All Credit & Debit Cards
    iii) Purchase Orders
    iv) Check
    v) Bank Transfer/ACH/Wire Transfer

    To process the order through Paypal/CC, you can simply checkout and process the payment.

    If you want to issue us Purchase Order/Check/Bank Transfer, Please contact us at the following details

    Call: 469.458.9636
    Email: sales@dcsupplies.net

  • If you have any queries, please contact us at the following details and we will be happy to help

    Call
    469.458.9636
    469.458.9638

    Email
    sales@dcsupplies.net

Reviews

Reviews

Write your review!

No customer reviews for the moment.

Write a review

APC SRT10KRMXLI 10kVA Smart-UPS On-Line Rackmount UPS

APC SRT10KRMXLI 10kVA Smart-UPS On-Line Rackmount UPS

APC SRT10KRMXLI Smart-UPS On-Line delivers 10,000VA/10,000W of double-conversion

Close